/-/https/www.sciencebuddies.org/cdn/Files/21464/5/sb-logo.png){kind=logo}
/-/https/www.sciencebuddies.org/cdn/Files/21464/5/sb-logo.png){kind=logo}
Forensic Science: Building Your Own Tool for Identifying DNA
Moderators: AmyCowen, kgudger, bfinio, MadelineB, Moderators
-
deleted-71949
- Posts: 59
- Joined: Mon Jun 22, 2009 3:55 pm
- Occupation: Student: High School Senior
- Project Question: Applying evolutionary algorithms to a Monte Carlo Tree Search
- Project Due Date: September 20, 2013 (to allow for snail mail, etc.)
- Project Status: I am conducting my experiment
Forensic Science: Building Your Own Tool for Identifying DNA
I tried this experiment, but the wire oozed out brown stuff, so it was not successful. Can anyone tell me what went wrong?
-
deleted-71417
- Former Expert
- Posts: 932
- Joined: Wed Oct 03, 2007 12:24 am
Re: Forensic Science: Building Your Own Tool for Identifying DNA
Hi,
You description of your experimental failure is too brief to diagose. First less us confirm that the experiment you were trying to do is:
https://www.sciencebuddies.org/science- ... p028.shtml
If you followed the directions carefully I would expect the experiment to work, so the first thing to do is to carefully review what you did vs. what the writeup said to do. If no separation of your sample occurred the first thing to look at is whether current passed through the sample. This can be detected by bubbles coming off the two wires during the separation process. If you don’t see the bubbles, you won’t get a separation.
If these ideas do not help solve the problem, please post again with a lot more details about your experiment and we will try to help you solve the problem.
Best regards,
Barrett L. Tomlinson
You description of your experimental failure is too brief to diagose. First less us confirm that the experiment you were trying to do is:
https://www.sciencebuddies.org/science- ... p028.shtml
If you followed the directions carefully I would expect the experiment to work, so the first thing to do is to carefully review what you did vs. what the writeup said to do. If no separation of your sample occurred the first thing to look at is whether current passed through the sample. This can be detected by bubbles coming off the two wires during the separation process. If you don’t see the bubbles, you won’t get a separation.
If these ideas do not help solve the problem, please post again with a lot more details about your experiment and we will try to help you solve the problem.
Best regards,
Barrett L. Tomlinson