Which department to contact
Moderators: kgudger, bfinio, MadelineB, Moderators
-
ggobugi27
- Posts: 1
- Joined: Thu Oct 28, 2010 7:52 pm
- Occupation: Student
- Project Question: Effect on humidity on Particulate Matter concentration of carpeted chamber and smooth floored chamber
- Project Due Date: n/a
- Project Status: I am conducting my research
Which department to contact
Hi, I'm doing a project involving particulate matter(PM2.5/PM10) concentration, and the particle counters come out to be very expensive, even the rentals. So I want to contact nearby universities to see if I could loan one for about a week. Which department would likely to have particle counters?
-
deleted-71712
- Former Expert
- Posts: 289
- Joined: Mon May 05, 2008 10:34 am
- Occupation: graduate student
- Project Question: n/a
- Project Due Date: n/a
- Project Status: Not applicable
Re: Which department to contact
Ah, contacting a university is a clever idea. My first thought is to look for a cleanroom, likely a facility for nanofabrication or semiconductors. That kind of work has to be done in an atmosphere with almost no particles. Researchers who make use of such a facility might be in materials science, electrical engineering, or maybe physics departments -- but actually the staff in charge of maintaining it probably have the most direct access to particle counting equipment.
http://en.wikipedia.org/wiki/Cleanroom
Good luck,
Amanda
http://en.wikipedia.org/wiki/Cleanroom
Good luck,
Amanda
-
lambda_cdm
- Former Expert
- Posts: 2
- Joined: Sat Oct 16, 2010 5:10 pm
- Occupation: Postdoctoral Scholar (Physics)
- Project Question: n/a
- Project Due Date: n/a
- Project Status: Not applicable
Re: Which department to contact
Hi
I agree with Amanda that your best bet is to look for a cleanroom facility at a University and the departments she mentioned are usually the heaviest users. What I recommend after working in multiple University cleanrooms, is to do online searches for "nanofabrication xxx University" or "microfabrication xxx University" as opposed to looking into specific departments since most cleanrooms are shared by many departments.
Hope this helps,
-Judy
I agree with Amanda that your best bet is to look for a cleanroom facility at a University and the departments she mentioned are usually the heaviest users. What I recommend after working in multiple University cleanrooms, is to do online searches for "nanofabrication xxx University" or "microfabrication xxx University" as opposed to looking into specific departments since most cleanrooms are shared by many departments.
Hope this helps,
-Judy

