/-/https/www.sciencebuddies.org/cdn/Files/21464/5/sb-logo.png){kind=logo}
/-/https/www.sciencebuddies.org/cdn/Files/21464/5/sb-logo.png){kind=logo}
Save those spoiling strawberries!
Moderators: AmyCowen, kgudger, bfinio, MadelineB, Moderators
-
Singeractorchic
- Posts: 1
- Joined: Thu Nov 08, 2012 9:19 am
- Occupation: Student: 8th grade
- Project Question: My project is "save those spoiling strawberries!" And in the project your immersing strawberries in hot water (not boiling) to see if this method will make strawberries last longer but it says to leave the strawberries in their plastic basket when immersing it in the hot water but won't the plastic basket melt in the water. What do I do?
- Project Due Date: 1-23-13
- Project Status: I am just starting
Save those spoiling strawberries!
In this project I have to immerse strawberries in hot (not boiling) water but it says to immerse the strawberries in a plastic basket won't the basket melt. What do I do?!?
-
deleted-71536
- Former Expert
- Posts: 895
- Joined: Tue Sep 06, 2005 3:59 pm
- Occupation: Professor
- Project Question: How do different animals adapt to their environment?
- Project Due Date: N/A
- Project Status: Not applicable
Re: Save those spoiling strawberries!
Hi there,
Welcome to Science Buddies! It looks like you are doing this project: https://www.sciencebuddies.org/science- ... ml#summary
This is a really cool project. It's great that you are thinking about melting points. According to the procedure (https://www.sciencebuddies.org/science- ... #procedure), you should be heating the water to 125 degrees Farenheit, which is just over halfway to boiling (212 Farenheit). Most plastics melt near or above the boiling temperature for water, so you'll be fine as long as you keep the temperature close to what the procedure suggests. Make sure to have a thermometer on hand, so you can monitor the temperature closely.
Please post again (in this same thread) if you have any more questions.
Heather
Welcome to Science Buddies! It looks like you are doing this project: https://www.sciencebuddies.org/science- ... ml#summary
This is a really cool project. It's great that you are thinking about melting points. According to the procedure (https://www.sciencebuddies.org/science- ... #procedure), you should be heating the water to 125 degrees Farenheit, which is just over halfway to boiling (212 Farenheit). Most plastics melt near or above the boiling temperature for water, so you'll be fine as long as you keep the temperature close to what the procedure suggests. Make sure to have a thermometer on hand, so you can monitor the temperature closely.
Please post again (in this same thread) if you have any more questions.
Heather