VERY VERY URGENT QUESTION...Please answer today

Ask questions about projects relating to: aerodynamics or hydrodynamics, astronomy, chemistry, electricity, electronics, physics, or engineering

Moderators: kgudger, bfinio, MadelineB, Moderators

Locked
nikhilfaips
Posts: 1
Joined: Mon May 20, 2013 5:11 am
Occupation: Student:11th grade
Project Question: In a project called "A Battery That Makes Cents", I have two URGENT questions:
1. Does the materials of the coins matter? If so, which ones won't work?
2. How much is the average current and voltage produced? Can it light an iPod, or just an LED?
Project Due Date: Tomorrow
Project Status: I am conducting my research

VERY VERY URGENT QUESTION...Please answer today

Post by nikhilfaips »

URGENT: I HAVE TO SUBMIT THIS PROJECT TOMORROW
I am making the project called "A Battery That Makes Cents", from sciencebuddies.org. But I Have some IMPORTANT QUESTIONS to ask regarding this topic. PLEASE ANSWER AS SOON AS POSSIBLE.
1. What is most useful as electrolyte?
2. Does the material of coins matter? If so, then which ones will NOT work?
You can access the project details on this URL https://www.sciencebuddies.org/science- ... shtml#help
THANK YOU SOOOOOO MUCH!!! :D
rmarz
Expert
Posts: 634
Joined: Sat Oct 25, 2008 1:26 pm
Occupation: Technology Consultant
Project Question: n/a
Project Due Date: n/a
Project Status: Not applicable

Re: VERY VERY URGENT QUESTION...Please answer today

Post by rmarz »

nikhilfaips - This experiment calls for vinegar (acetic acid)) to be used as the electrolyte, although other similar experiments in Science Buddies also use lemon juice (citric acid). Many fruit juices can be experimented with as well as other electrically dissimilar metals for the battery construction. Copper and Zinc are often used. You can do some searches on the subject and create even more hypotheses about what combinations of metals, electrode area, and electrolyte create a range of results. Terminal voltage and current generating capability are very testable. Good luck.

Rick Marz
rmarz
Expert
Posts: 634
Joined: Sat Oct 25, 2008 1:26 pm
Occupation: Technology Consultant
Project Question: n/a
Project Due Date: n/a
Project Status: Not applicable

Re: VERY VERY URGENT QUESTION...Please answer today

Post by rmarz »

nikhilfaips - I noticed a few additional questions in the margin relating to powering an iPod or LED. There is an important power issue here. These cells, with say 1 square inch of electrode area, may provide a few milliamps of current. To increase the current, you will have to increase the area of both of the dissimilar metal electrodes. Also, there is a voltage threshold for either device and that is why you will have to alter your construction to have several cells connected in series to increase the output voltage. The LED example is pretty easy, and you should get pretty good illumination of a 'red' LED with about 5-10 milliamps and just over 1.2 volts. I think the iPod will need a dramatically higher voltage and current. I'm just guessing, but probably in the range of 3-4 volts and over 50 milliamps. Just a guess on my part as I haven't tried to measure power consumption on an iPod.

Rick Marz
Locked

Return to “Grades 9-12: Physical Science”