Hi!
I'm currently planning my science research report. I've already received my research, but I cannot interpret what it means.
Could someone possibly explain what the Seebeck effect is in 8th grade terminology?
Seebeck Effect Research Report
Moderators: AmyCowen, kgudger, bfinio, MadelineB, Moderators
-
cooleen
- Posts: 1
- Joined: Mon Dec 02, 2013 6:49 pm
- Occupation: Student: 8th grade
- Project Question: My project is about the Seebeck effect, and also to turn heat into electricity to measure it with a thermocouple thermometer.
- Project Due Date: January 15, 2014
- Project Status: I am conducting my research
-
kgudger
- Moderator
- Posts: 421
- Joined: Wed Sep 17, 2008 9:20 pm
- Occupation: electronic engineer
- Project Question: n/a
- Project Due Date: n/a
- Project Status: Not applicable
Re: Seebeck Effect Research Report
Hello and welcome to the forums:
I used a search engine to look for "Seebeck Effect", and found many definitions that I think you can understand. One I found here: http://searchnetworking.techtarget.com/ ... eck-effect says:
Keith
I used a search engine to look for "Seebeck Effect", and found many definitions that I think you can understand. One I found here: http://searchnetworking.techtarget.com/ ... eck-effect says:
Also, look here: http://www.howstuffworks.com/thermoelectricity-info.htm(In) the Seebeck effect .. a temperature difference between two (different) conductors ... produces a voltage difference between them. When heat is applied to one of the two conductors, heated electrons flow toward the cooler one. If the pair is connected through an electrical circuit, direct current (DC) flows through that circuit.
Let us know what you're having trouble with and we'll try and help.Not all the electrons inside a metal are bound to specific atoms; some are free to move about. These free electrons behave like a gas. The extent of diffusion of the "electron gases" depends on the temperature. If the two junctions are at different temperatures, a potential difference will exist between the junctions and a current will flow.
Keith
-
greenx234
- Posts: 2
- Joined: Mon Jan 06, 2014 12:57 pm
- Occupation: Student 8th
- Project Question: Seebeck effect
- Project Due Date: January 25
- Project Status: I am just starting
Re: Seebeck Effect Research Report
Hi i'm just starting this project and i was wondering what the independent variables are My project is due in 2-3 weeks and i'm really stuck Plz help
-
kgudger
- Moderator
- Posts: 421
- Joined: Wed Sep 17, 2008 9:20 pm
- Occupation: electronic engineer
- Project Question: n/a
- Project Due Date: n/a
- Project Status: Not applicable
Re: Seebeck Effect Research Report
Hello:
I'm assuming that you're doing this project: https://www.sciencebuddies.org/science- ... ml#summary. Is this correct?
Could you please what you will measure with the thermocouple? If you can do that, we can help with the variables. You should also look here: https://www.sciencebuddies.org/science- ... bles.shtml
Good luck!
Keith
I'm assuming that you're doing this project: https://www.sciencebuddies.org/science- ... ml#summary. Is this correct?
Could you please what you will measure with the thermocouple? If you can do that, we can help with the variables. You should also look here: https://www.sciencebuddies.org/science- ... bles.shtml
Good luck!
Keith

