Measuring Skyglow with a Digital Camera

Ask questions about projects relating to: aerodynamics or hydrodynamics, astronomy, chemistry, electricity, electronics, physics, or engineering

Moderators: kgudger, bfinio, MadelineB, Moderators

Locked
deleted-340596
Posts: 2
Joined: Sun Jan 31, 2016 7:30 pm
Occupation: Student

Measuring Skyglow with a Digital Camera

Post by deleted-340596 »

Hi there!
So, I have picked this experiment for my science project and cannot change it. I am getting worried though because I have a Nikon D3300 with a 18-55 mm lens. The widest aperture I can get is f/3.5 but it says I need f/2.8. Would it be okay to use that aperture, would the experiment still work. Also, can I take the night pictures before the calibration?
Thank you!
norman40
Former Expert
Posts: 1022
Joined: Mon Jul 14, 2014 1:49 pm
Occupation: retired chemist
Project Question: Volunteer
Project Due Date: n/a
Project Status: Not applicable

Re: Measuring Skyglow with a Digital Camera

Post by norman40 »

Hello paulanordstrom,

I'm assuming that you're working on the project described here:

https://www.sciencebuddies.org/science- ... p022.shtml

Yes, the experiment will work with your f/3.5 aperture. With your lens the maximum aperture is f/3.5 at the 18 mm focal length. The aperture is reduced when the lens is zoomed out to longer focal lengths. My suggestion is keep the lens at the 18 mm setting throughout the experiment.

I think it’s OK to take the night pictures before the calibration step. Just be sure to keep the same lens and ISO settings for both the night pictures and the calibration.

I hope this helps. Please ask again if you have more questions.

A. Norman
Locked

Return to “Grades 9-12: Physical Science”