/-/https/www.sciencebuddies.org/cdn/Files/21464/5/sb-logo.png){kind=logo}
/-/https/www.sciencebuddies.org/cdn/Files/21464/5/sb-logo.png){kind=logo}
Hi
We are working on
https://www.sciencebuddies.org/science- ... #procedure
When we tried first everything worked fine.We were able to turn off the motors in normal light at night.The motors turned on only with the torch light.We also set the potentiometer so that the motors are off on normal lights.
When we try now,the motors do not turn off ,even in dark.Please help.We have to get it resolve fast.
Please let us know.
Thanks
Maliha
Motors do not stop
Moderators: AmyCowen, kgudger, bfinio, MadelineB, Moderators
-
norman40
- Former Expert
- Posts: 1022
- Joined: Mon Jul 14, 2014 1:49 pm
- Occupation: retired chemist
- Project Question: Volunteer
- Project Due Date: n/a
- Project Status: Not applicable
Re: Motors do not stop
Hi Maliha,
Sorry that you’re having trouble with your light-tracking bristlebot. I’m not familiar with this project but I will try to help.
My first suggestion is to check all of the wiring on your breadboard to make sure everything is connected properly. Next, try turning each of the potentiometers to see if you can shut off the corresponding motor. If that works, try testing the bristlebot with your torch light.
I hope this helps. Please post again if you have more questions.
A. Norman
Sorry that you’re having trouble with your light-tracking bristlebot. I’m not familiar with this project but I will try to help.
My first suggestion is to check all of the wiring on your breadboard to make sure everything is connected properly. Next, try turning each of the potentiometers to see if you can shut off the corresponding motor. If that works, try testing the bristlebot with your torch light.
I hope this helps. Please post again if you have more questions.
A. Norman