Lighting things on Fire Safely

Ask questions about projects relating to: aerodynamics or hydrodynamics, astronomy, chemistry, electricity, electronics, physics, or engineering.

Moderators: AmyCowen, kgudger, bfinio, MadelineB, Moderators

Locked
deleted-353806
Posts: 1
Joined: Wed Mar 30, 2016 5:29 pm
Occupation: Student

Lighting things on Fire Safely

Post by deleted-353806 »

I want to know how to light a tile floor on fire safely. Should I use a low temperature burning chemical like alcohol? Also, if I put alcohol in a spray bottle and spray it on top of a flame, it would light on fire right? And if it did, when the alcohol fluid hit the ground, with hit the ground (grass) on fire? Thanks!
deleted-289675
Former Student Expert
Posts: 40
Joined: Sat Aug 22, 2015 3:38 pm
Occupation: Student: 11th grade
Project Question: Ask An Expert student mentor
Project Due Date: n/a
Project Status: Not applicable

Re: Lighting things on Fire Safely

Post by deleted-289675 »

Tile floors, if they are made of ceramic, don't light on fire. So unless you already have alcohol on the floor, you won't get a flame. The fire will go out as soon as all the alcohol is used up in the combustion reaction. However, I would not advise lighting a fire indoors. And yes, if flaming alcohol hits the ground, the grass will light on fire. Therefore, you should only perform this experiment in either a fireplace or firepit. You can easily build your own firepit if you do not have one: http://www.diynetwork.com/how-to/outdoo ... d-fire-pit

I don't know if this answers your question, so feel free to ask me to clarify. It would also help if you explain what sort of experiment you are conducting.

-Karen Zhang
deleted-2131
Former Expert
Posts: 1415
Joined: Sat Nov 08, 2003 11:27 pm
Occupation: Planetary Scientist
Project Question: N/A
Project Due Date: N/A
Project Status: Not applicable

Re: Lighting things on Fire Safely

Post by deleted-2131 »

Hi explosionsandfunstuff,

I want to emphasize that what you are asking about is *very dangerous*. You could get very, very badly burned, you could injure other people, and you could start a severe fire. DO NOT do such a thing without first clearing it with your parents, teacher, and scientific review committee. DO NOT perform the test you are talking about without direct, qualified supervision (e.g., fire department). I would advise you to avoid this project entirely! It's not safe.
All the best,
Terik
Locked

Return to “Grades 6-8: Physical Science”