/-/https/www.sciencebuddies.org/cdn/Files/21464/5/sb-logo.png){kind=logo}
/-/https/www.sciencebuddies.org/cdn/Files/21464/5/sb-logo.png){kind=logo}
Well, I plan on doing the Briggs-Rauscher Oscillating reaction and was wondering if I could substitute Potassium Iodate with Potassium Iodide. Just a quick question for which I sort of need a quick answer.
PS: Could I also replace the sulfamic acid with sulfuric acid?
Minds of Their Own: A Chemical Reaction that Changes, then Changes Back!
Moderators: kgudger, bfinio, MadelineB, Moderators
-
deleted-326733
- Posts: 1
- Joined: Mon Dec 07, 2015 5:27 pm
- Occupation: Student
-
norman40
- Former Expert
- Posts: 1022
- Joined: Mon Jul 14, 2014 1:49 pm
- Occupation: retired chemist
- Project Question: Volunteer
- Project Due Date: n/a
- Project Status: Not applicable
Re: Minds of Their Own: A Chemical Reaction that Changes, then Changes Back!
Hello Last_Hope_Left,
There are some variations on some of the components that can be used for the Briggs-Rauscher Oscillating reaction. But I don’t think any of these will work with potassium iodide because the iodate is necessary for the reaction mechanism. My suggestion is to use the components and directions listed in the project procedure.
I hope this helps and good luck with your project. Please post again if you have more questions.
A. Norman
There are some variations on some of the components that can be used for the Briggs-Rauscher Oscillating reaction. But I don’t think any of these will work with potassium iodide because the iodate is necessary for the reaction mechanism. My suggestion is to use the components and directions listed in the project procedure.
I hope this helps and good luck with your project. Please post again if you have more questions.
A. Norman