The Chemistry of Clean: Make Your Own Soap to Study Soap Synthesis
|Areas of Science||
|Time Required||Average (6-10 days)|
|Prerequisites||This procedure should be done in a chemistry lab with adult supervision.|
|Material Availability||Some specialty items are needed; see the Materials and Equipment list for details.|
|Cost||High ($100 - $150)|
|Safety||Minor injury is possible. This procedure requires use of sodium hydroxide solution. Sodium hydroxide can burn skin and eyes. See the Experimental Procedure for important cautionary notes. Adult supervision is required.|
AbstractSoap comes in many varieties and forms—from bars to bottles to boxes. The uses for soaps are just as expansive—from cleaning our hands, hair, and faces to a variety of household cleaning jobs, such as dishes or laundry. One thing all these different soaps have in common is their chemical origin; they were all made by mixing fat or oil with a strongly basic solution, such as lye. In this chemistry science project, you will carry out the chemical steps needed to transform coconut oil into a usable bar of soap, and purify it with salt to measure how its pH changes with its purity.
Make your own soap by mixing coconut oil with sodium hydroxide and demonstrate increased soap purity as you follow steps to purify it with salt (sodium chloride).
David B. Whyte, PhD, Science Buddies
Cite This PageGeneral citation information is provided here. Be sure to check the formatting, including capitalization, for the method you are using and update your citation, as needed.
Last edit date: 2018-12-01
It's not clear who first invented soap. There are documents suggesting that it was used by ancient Phoenicians over 5,000 years ago. Substances believed to be soaps have been found in ancient Egyptian ruins. It might have been invented independently in several regions at different times. An intriguing story about how the Romans learned to make soap involves the tradition of sacrificing animals on Mount Sapo. Parts of the sacrificed animals were burned as offerings to the gods. Fats from the burnt animal flesh mixed with ashes from the fires. When it rained, the Roman's noticed that a substance formed in the pools of water that ran from the ashes that had been mixed with the animal fats. Upon experimentation, they learned that this new substance, later called soap, had useful properties, including the ability to clean surfaces. Chemists now refer to the chemical reaction for making soap as saponification, in honor of the discovery on Mount Sapo.
Soap is formed by mixing fats or oils with strong bases, such as sodium hydroxide. Sodium hydroxide is also called lye. The traditional way to make lye is to leach ashes with water. The ashes contain substantial amounts of sodium hydroxide, which dissolves in the water, forming a solution of sodium hydroxide. Before soap became available from large companies, people made their own by mixing animal fats with lye in a pot and boiling it. You could tell when it was "done" by taking a small amount of the mixture and adding it to some clean water. If there were droplets of fat on the surface of the water, the reaction was incomplete. More lye was added and the reaction continued. It was later discovered that the soap could be purified by adding salt to it. The addition of salt caused the soap to form a solid that excluded impurities, such as the sodium hydroxide. This soap was milder and suitable not just for washing clothes or pots, but also for use on skin. The figure shows the chemical reaction that is the basis for soap synthesis.
Figure 1. Saponification of a fat molecule. The bonds that connect the long chains of the fat molecule to the "backbone" are broken by the reaction of sodium hydroxide (and heat), yielding glycerol and three fatty-acid molecules (soap). The "acid" part of the fatty acid is the side with the oxygen (O) atoms. This end mixes well with water. The fatty part is the long chain of carbons, shown here as the crooked lines. This end mixes well with fats and oils. In the second step, the fatty acids are converted into relatively pure fatty-acid salts by the addition of sodium chloride.
Now to explain, chemically, how soap works to clean things. Fats mixed with strong bases are hydrolyzed into fatty acids. Fatty acids have the very useful property of having one end that mixes well with water (it is hydrophilic, or "water-loving") and another end that mixes well with oils and fats (it is hydrophobic, or "water-hating"). The part that mixes well with water is the "acid" part. The part that mixes well with fats is the "fatty" part. This dual nature allows soaps to dissolve fat, grease, and dirt in water. Without soap, oil and water don't mix. With soap, they do.
The addition of salt (sodium chloride) to the crude form of soap forms fatty-acid salts. The sodium ions from the sodium chloride bond with the fatty acid, forming a product that is less soluble in water. Because of this reduced solubility, the soap leaves the solution and forms a solid mass. This process of "dropping" out of the solution is called precipitation. Precipitation is a great way to purify something because it separates the chemical you want (soap) from a crude mixture containing chemicals you do not want. You can imagine that a mixture of animal fat and leached ashes that has been boiled for some time might have some unpleasant byproducts! Salt precipitation of the soap leaves these behind.
Soap can be made from oils and fats derived from plants, as well as from animals. In this chemistry science project, you will synthesize soap from coconut oil. The soap will be purified by three rounds of salt purification. You will track the purity of the soap by measuring its pH after each salt-precipitation step. As more sodium hydroxide is removed, the pH will become lower. If that statement doesn't make sense to you, look back at the reaction in Figure 1 and read our Acids, Bases, & the pH Scale help guide. At the end of the experiment, you will add some fragrance and you'll have your own homemade soap!
Terms and Concepts
- Fatty-acid salt
- Coconut oil
- What are other oils, besides coconut, that are used to make bath soaps?
- Based on your research, why is potassium hydroxide used instead of sodium hydroxide to make certain kinds of soaps?
- Based on your research, what is a micelle?
- What is the chemical name of the most common fatty-acid molecule found in coconut oil?
- How does the "split-personality" of a soap molecule make it a good cleaning agent?
- What is a triglyceride?
- The procedure for this science project uses 3-molar (3M) sodium hydroxide. What does the term molar mean?
- Dobberpuhl, D.A. (n.d.). Chemistry Explained: Soap. Retrieved May 25, 2010, from http://www.chemistryexplained.com/Ru-Sp/Soap.html
- Helmenstine, A.M. (n.d.). How Soap Cleans. Retrieved May 26, 2010, from http://chemistry.about.com/od/cleanerchemistry/a/how-soap-cleans.htm
News Feed on This Topic
Materials and Equipment
- Coconut oil (30mL)
- 3-M Sodium hydroxide solution (45mL)
- pH paper
- Distilled water
- Stirring rod
- Sodium chloride (45g)
- Filter paper
- Soap mold
- Peppermint oil
- Pyrex beakers, 100-mL (2)
- Graduated cylinders, 10-, 25-, and 50-mL
- Hot pad or oven mitts
- Hot plate
- Wire gauze
- Lab notebook
- Scale capable of measuring in grams; needed if the Sodium chloride is in solid rather than liquid form
- Clear plastic cups (3)
Disclaimer: Science Buddies participates in affiliate programs with Home Science Tools, Amazon.com, Carolina Biological, and Jameco Electronics. Proceeds from the affiliate programs help support Science Buddies, a 501(c)(3) public charity, and keep our resources free for everyone. Our top priority is student learning. If you have any comments (positive or negative) related to purchases you've made for science projects from recommendations on our site, please let us know. Write to us at firstname.lastname@example.org.
- Sodium hydroxide can burn the skin and the eyes. Do not wear contact lenses when working with the sodium hydroxide solution since this increases chance of injury if the sodium hydroxide splashes in your eyes.
- Be sure to wear safety goggles, gloves, and a lab coat or apron.
- If sodium hydroxide splashes onto your skin, wash immediately with plenty of water.
- If it splashes in your eyes, immediately flush them with plenty of water for at least 15 minutes and contact a physician.
- Remove clothing splashed with sodium hydroxide immediately and wash it before reuse.
Performing the Experiment
- Put on your lab coat, gloves, and safety goggles.
- Place 10 mL of coconut oil and 15 mL of 3-M sodium hydroxide solution into a 100-mL beaker.
Using a hotplate or a low-flame Bunsen burner, heat the mixture to a gentle boil.
- Use the wire gauze to stabilize the beaker on the hotplate if it is the kind with a spiral heating coil.
- Stir constantly. Avoid spattering of the sodium hydroxide solution by using gentle heating and by stirring constantly.
- Boil for 20 minutes, or until all of the water has evaporated.
- Carefully remove this beaker from the heat and allow it to cool.
Using the pH paper, test the pH of the crude soap.
- For steps where the soap is still a liquid, the pH can be measured by simply dipping the pH paper into the liquid. Follow the instructions on the pH paper package to interpret the results.
- For steps where the soap is a solid, it may be wet enough to just rub the pH paper against the soap. If it is not, then add 3-5 drops of water and then rub the pH paper onto these soap-water drops. Follow the instructions on the pH paper package to interpret the results.
- If you are unfamiliar with what the pH scale is or what it means, read the Science Buddies guide to Acids, Bases, & the pH Scale.
- Record the pH in your lab notebook. Call it Crude soap.
- Add 15 mL of distilled water to the soap mixture and stir it with a stirring rod.
Heat 50 mL of saturated sodium chloride solution in a 100-mL beaker until it is almost boiling.
- If you are starting with solid sodium chloride (rather than liquid), weigh 15 g of sodium chloride and put it in a 100-mL beaker.
- Add 50 mL of water and stir until dissolved.
- Heat the salt solution until it is almost boiling.
- Add the hot sodium chloride solution to the soap mixture. Use a hot pad or oven mitt, as needed.
- Break up lumps of soap with a clean stirring rod.
Cover the beaker containing the soap mixture with cheesecloth and pour the liquid into a clear plastic cup. This is called decanting the liquid.
- Cheesecloth is made of a very fine mesh allowing for the excess liquid to drain out while retaining all the solids. The solids are the soap.
- You want to keep the material left in the beaker after you decant the liquid. Those solids are the soap.
- Measure the pH of the soap with a new pH paper. See step 7b for instructions on how to measure the pH of solid soap.
- Record the pH in your lab notebook. Call it Washed 1 time.
- Repeat steps 9–14 two more times.
- Record the pH after each wash. Call the pH readings Washed 2 times and Washed 3 times.
- Add three drops of peppermint oil to the soap.
- Press the soap between two pieces of filter paper to remove as much liquid as possible.
- Press the soap into the soap mold and dry it overnight.
- Measure and record the pH reading of the dried soap. Call the pH reading Final product.
- If the Final product pH reading is between 6 and 10, the soap is considered safe to use. If this is the case, take the soap out of the mold and confirm its ability to produce suds by washing your hands with it. Did the procedure successfully convert fat into soap?
- Record you observations about the color, odor, and texture of the soap in your lab notebook.
- Perform the entire procedure two more times with clean and fresh materials to collect additional data and to demonstrate that your results are repeatable.
Graphing Your Data
- Average the pH readings (crude and washes 1–3) for each trial.
- Graph the number of salt washes on the x-axis and the average pH readings on the y-axis.
- How does the ph change with more washes? Why?
If you like this project, you might enjoy exploring these related careers:
- Measure the pH of the liquid that was decanted and add this data to your presentation.
- Vary the time that the oil and sodium hydroxide are boiled. Graph the weight of soap produced vs. the time of boiling.
- Vary the temperature at which the oil and sodium hydroxide react. Keep the time constant. Graph the weight of soap produced vs. temperature.
- Determine how soap made with complete saponification differs from soap made with partial saponification (that is, with some oil still in the soap in the form of triglycerides).
Recent Feedback Submissions
|Sort by Date||Sort by User Name|
What was the most important thing you learned?
all of them was useful
What problems did you encounter?
Can you suggest any improvements or ideas?
Science Buddies materials are free for everyone to use, thanks to the support of our sponsors. What would you tell our sponsors about how Science Buddies helped you with your project?
good job well done
Overall, how would you rate the quality of this project?
What is your enthusiasm for science after doing your project?
Compared to a typical science class, please tell us how much you learned doing this project.
About the same
|Do you agree?||Report Inappropriate Comment|
Ask an ExpertThe Ask an Expert Forum is intended to be a place where students can go to find answers to science questions that they have been unable to find using other resources. If you have specific questions about your science fair project or science fair, our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.
Ask an Expert
News Feed on This Topic
Looking for more science fun?
Try one of our science activities for quick, anytime science explorations. The perfect thing to liven up a rainy day, school vacation, or moment of boredom.Find an Activity
Explore Our Science Videos
Make a Homemade Fly Trap
Make a Lemon Volcano - Fun Science Experiment
How to Build a Brushbot