Factors that Affect the Transfer of Force through Saturated Soil *
|Time Required||Average (6-10 days)|
|Material Availability||Readily available|
|Cost||Low ($20 - $50)|
Soil liquefaction is a phenomenon where soil that is saturated with water suddenly loses its strength and behaves like a liquid. This usually occurs due to sudden, large stresses on the soil — for example, from an earthquake. This can be very dangerous for buildings sitting on top of the soil, as they can suddenly sink into the ground! The embedded video explains soil liquefaction in more detail.
Is there a way to prevent soil liquefaction? Do you think adding certain materials to sandy soil could minimize the effects of soil liquefaction? You can do an experiment to test this at home using some PVC pipe, wooden dowels, sandy soil, and various "filler" materials (leaves, gravel, Styrofoam® balls — use your imagination!). Here is a rough outline of the procedure you can follow to test this at home. Remember, since this is an abbreviated project idea, you will need to come up with the detailed procedure on your own.
- Drill four holes in a piece of PVC pipe. The holes should be equally spaced vertically and should be sized to fit the dowels that you will be using in the experiment.
- Cover the bottom of the pipe with mosquito netting or cheesecloth, which will allow water to seep in while keeping the soil in the pipe.
- Fill the pipe with soil.
- Saturate the soil with water by placing the bottom of the pipe in a container filled with water and letting the water seep into the pipe from the bottom. You will probably need to leave the pipe in the water overnight to give it time to fully saturate. Make sure you use the same amount of water each time.
- Once the soil is saturated, seal the bottom of the pipe with duct tape to keep the soil and water from seeping out.
- Quickly insert the four dowels into the holes.
- Place weights on the soil at the top of the pipe.
- Wait at least one hour for the soil to settle. To assist the settling of the soil, tap the pipe lightly two to three times.
- Drop the pipe three times on a hard surface from a height of approximately two inches to simulate an earthquake. Alternatively, if you have access to a shake table, this could also be used to simulate the effects of an earthquake. If using a shake table, you will need to make sure that the pipe remains vertical while on the shake table.
- Pull out the dowels using a force-measuring device (such as a spring scale) to determine the level of contact forces in the soil.
- Repeat steps 3-10, this time mixing one of your additives in with the soil. Make sure to thoroughly clean the PVC pipe and dowels between each trial. If you have enough pieces of pipe and dowels, you could do all the trials at once instead.
The Bibliography has more information about soil liquefaction to help you get started with your research.
Marie E. Jenkins
Edited by Ben Finio, PhD, Science Buddies
Cite This PageGeneral citation information is provided here. Be sure to check the formatting, including capitalization, for the method you are using and update your citation, as needed.
Last edit date: 2018-04-12
The Soil Liquefaction Web Site from the University of Washington offers a great introduction to liquefaction: http://www.ce.washington.edu/~liquefaction/html/main.html
The US Geological Survey web site also has some general information on earthquakes and liquefaction that is written specifically for students grades 7-12: http://earthquake.usgs.gov/learn/kids/
News Feed on This Topic
Ask an ExpertThe Ask an Expert Forum is intended to be a place where students can go to find answers to science questions that they have been unable to find using other resources. If you have specific questions about your science fair project or science fair, our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.
Ask an Expert
If you like this project, you might enjoy exploring these related careers:
Soil ScientistNot all dirt is created equal. In fact, different types of soil can make a big difference in some very important areas of our society. A building constructed on sandy soil might collapse during an earthquake, and crops planted in soil that doesn't drain properly might become waterlogged and rot after a rainstorm. It is the job of a soil scientist to evaluate soil conditions and help farmers, builders, and environmentalists decide how best to take advantage of local soils. Read more
Materials Scientist and EngineerWhat makes it possible to create high-technology objects like computers and sports gear? It's the materials inside those products. Materials scientists and engineers develop materials, like metals, ceramics, polymers, and composites, that other engineers need for their designs. Materials scientists and engineers think atomically (meaning they understand things at the nanoscale level), but they design microscopically (at the level of a microscope), and their materials are used macroscopically (at the level the eye can see). From heat shields in space, prosthetic limbs, semiconductors, and sunscreens to snowboards, race cars, hard drives, and baking dishes, materials scientists and engineers make the materials that make life better. Read more
GeoscientistJust as a doctor uses tools and techniques, like X-rays and stethoscopes, to look inside the human body, geoscientists explore deep inside a much bigger patient—planet Earth. Geoscientists seek to better understand our planet, and to discover natural resources, like water, minerals, and petroleum oil, which are used in everything from shoes, fabrics, roads, roofs, and lotions to fertilizers, food packaging, ink, and CD's. The work of geoscientists affects everyone and everything. Read more
News Feed on This Topic
Looking for more science fun?
Try one of our science activities for quick, anytime science explorations. The perfect thing to liven up a rainy day, school vacation, or moment of boredom.Find an Activity
Explore Our Science Videos
Make Fake Snow - Craft Your Science Project
How to Build an ArtBot
Build a Gauss Rifle