Balancing the Load: The See-Saw as a Simple Machine
|Time Required||Very Short (≤ 1 day)|
|Prerequisites||Playground with a see-saw|
|Material Availability||Readily available|
|Cost||Very Low (under $20)|
|Safety||Be careful getting on and off the see-saw!|
AbstractHave you ever tried to pull out a nail out of wood with your bare hands? Or have you tried to shove a staple through a stack of papers without a stapler? A hammer's claw, a stapler, a pair of pliers and a shovel are each examples of everyday tools that use levers to make our work easier.
ObjectiveIn this experiment, you will use a playground see-saw to investigate how a simple machine works. The objective is to learn the relationship between mass and distance when the see-saw is balanced and unbalanced.
Edited by Andrew Olson, Science Buddies.
Cite This PageGeneral citation information is provided here. Be sure to check the formatting, including capitalization, for the method you are using and update your citation, as needed.
Last edit date: 2018-03-14
The see-saw is not just a playground toy, it is an example of a simple machine.
In physics, simple machines are tools that make it easier to do work. A lever is an example of a simple machine. A lever is a straight rod or board that pivots on a stationary point called a pivot point or a fulcrum. Levers are often used to lift heavy loads. A see-saw, a shovel, and a wheelbarrow are all examples of levers.
Terms and Concepts
- What are the three classes of levers? Give an example of each.
- What are some common tools or simple machines that are examples of levers?
- Levers: Simple Machines
- After you've finished your experiment, see if you can solve the puzzle on this page:
- Introduction to General Physics Concepts:
Hewitt, Paul G. 2002. "Conceptual Physics," Prentice Hall, IL.
- Simple Physics Concepts for Kids:
Keller, R.W. 2005. "Real Science for Kids: Physics, Level 1," Gravitas Publications, Inc., NM.
News Feed on This Topic
Materials and Equipment
- tape measure
- bathroom scale
- one adult
- two children of approximately the same weight
- Determine the mass of each of the people participating in the experiment using the scale. (If your scale is calibrated only in pounds, you can convert to kilograms by multiplying by 0.454 kg/lb.) Record the mass of each participant in lab notebook. (For this sample procedure, we will refer to the participants using the following code: Adult=A, First child=C1, Second child=C2.)
- Have C1 and C2 sit on the see-saw. Have C1 and C2 adjust their positions until the two masses are balanced. Measure the distance of each mass from the fulcrum. (Note: The distance should be measured along the side of the lever from the center line of the fulcrum to the center line of each mass. If your tape measure is calibrated only in inches, you can convert to meters by multiplying by 0.0254 m/in.) Record the data in your lab notebook (see the example data table).
- If one person moves closer to the fulcrum, what happens to the see-saw? Make a second data table like the example for the see-saw when it is unbalanced. (Be sure to note which side of the see-saw is up.)
- Have C1 and C2 get off the see-saw, and then repeat steps 2 and 3 four more times.
- Repeat the experiment (steps 2–4), but this time try to balance A and C1 or A and C2.
Sample Data Table: Level Balanced Mass on Left
Mass on Right
Fulcrum to Left Mass
Fulcrum to Right Mass
Average Distance: Left
Average Distance: Right
Distance × Mass:
Distance × Mass:
(Mass of C1) (Mass of C2) 1 2 3 4 5 (Mass of A) (Mass of C1) 1 2 3 4 5
If you like this project, you might enjoy exploring these related careers:
- After filling out your data tables, can you predict where you could have C1 and C2 sit on one side of the see-saw in order to balance A on the other side?
- Build a lever that has a moveable pivot point. What are the results of this experiment if you move the pivot point instead of the masses?
- With a mass on one end of the see-saw, push down on the other end. Experiment with how this type of lever could be used to lift and move a large mass.
Ask an ExpertThe Ask an Expert Forum is intended to be a place where students can go to find answers to science questions that they have been unable to find using other resources. If you have specific questions about your science fair project or science fair, our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.
Ask an Expert
News Feed on This Topic
Looking for more science fun?
Try one of our science activities for quick, anytime science explorations. The perfect thing to liven up a rainy day, school vacation, or moment of boredom.Find an Activity
Explore Our Science Videos
Make A Tissue Paper Parachute - STEM Activity
Make Your Own Lava Lamp
10 Robotics Projects Kids Can Really Make!