Jump to main content

How Does Atmospheric Temperature Affect the Water Content of Snow?

1
2
3
4
5
23 reviews

Abstract

Are you a snow aficionado? What atmospheric conditions produce light, powdery snow, and what conditions produce heavy, wet snow? This project shows you how to use data from daily balloon soundings of the atmosphere and your own snow measurements to find out.

Summary

Areas of Science
Difficulty
 
Time Required
Very Long (1+ months)
Prerequisites
You'll need to collect snow from many snowfall events for this project, so you will need cooperation from the weather and an area outside where you can gather undisturbed snow from each snowfall. You will also need a computer with Internet access to gather atmospheric temperature data.
Material Availability
Readily available
Cost
Very Low (under $20)
Safety
No issues
Credits

Andrew Olson, Ph.D., Science Buddies

Sources

This project is based on:

Objective

The goal of this project is to investigate the effect of atmospheric temperature on snowfall depth.

Introduction

If you're lucky enough to live in a place that gets snow in winter, you know that the feel of the snow can vary a lot. Sometimes it can be light and fluffy, and other times heavy and wet. The light, fluffy snow has less water content than the heavy snow. What accounts for these differences?

One possibility might be the temperature of atmosphere in the clouds where the snow forms. Another possibility might be the temperature of the atmosphere through which the snow falls on its way to the ground. You may be wondering, "How in the world am I going to measure the temperature of the clouds?" Fortunately, you don't have to make the measurements yourself. The National Oceanic and Atmospheric Administration (NOAA) has already done it for you. Twice a day all over the U.S., weather balloons are used to take atmospheric soundings. The data from these soundings is available online (Unisys Corp., 2005).

Figure 1 shows an example of an upper air sounding plot. This is a standard graph used by meteorologists to analyze data from a balloon sounding. There is a lot of additional information in the graph, but basically it is a plot of temperature (x-axis) vs. height (y-axis). The white data line on the left shows the dewpoint vs. pressure, and the white data line on the right shows the temperature vs. pressure. The pressure (in millibars, mb) is shown on the y-axis in blue lettering, and the height (in m) is shown in white lettering. A sounding plot is also called a "Skew T" plot, because the temperature axis is plotted at an angle (i.e., skew) of 45°. The temperature lines of the Skew T are in blue (at 45°).

An upper air sounding plot graphs the temperature at certain heights in the atmosphere

Figure 1. Example of an upper air sounding plot from the Unisys Weather webpage. Data shown are from International Falls, MN, March 23, 2007.

Atmospheric pressure decreases with height above the Earth's surface. The higher you go, the less atmosphere remains above you, so the pressure decreases. "Meteorology uses pressure as the vertical coordinate and not height. This works out better for thermodynamic computations that are done on a regular basis. Pressure decreases in the atmosphere exponentially as height increases reaching 0 pressure in space. The standard unit of pressure is millibars (mb or hectopascals-hPa) of which sea level is around 1015 mb. Here is a table of pressure levels and approximate heights (Unisys Corp., 2001):"

Pressure Approximate Height Approximate Temperature
(mb) (m) (ft) (°C) (°F)
1015
(sea level)
0 0 15 59
1000 100 300 15 59
850 1500 5000 5 41
700 3000 10000 −5 23
500 5000 18000 −20 −4
300 9000 30000 −45 −49
200 12000 40000 −55 −67
100 16000 53000 −56 −69

Figure 2 shows how to read the temperature at a chosen pressure level (height). On the y-axis, find the pressure level (in mb) where you want to know the temperature. Follow the horizontal pressure line over until it intersects with the temperature plot (right-hand data plot, in white). Then follow the 45° temperature line down and to the left to the temperature axis. In the example below, the temperature at 700 mb was about −11°C.

An upper air sounding plot explains how to read the temperature at a certain height
Figure 2. Reading the temperature of the atmosphere at 700 mb (3022 m) from the sounding plot. Follow the horizontal pressure line to where it intersects with the temperature plot (right hand data line, in white). Then follow the 45° temperature line down and to the left to the temperature axis. In this example, the temperature at 700 mb was about −11°C.

There is a lot more information in the sounding plot, but it isn't important for this project. If you want to learn more about sounding plots, do more research about them online.

In this project you will use atmospheric sounding data combined with your own measurements of the snow depth to liquid ratio to find out if there is a relationship between atmospheric temperature and snow quality.

Terms and Concepts

To do this project, you should do research that enables you to understand the following terms and concepts:

Questions

Bibliography

These websites have information about the atmosphere:

For current and archived sounding plots:

  • NOAA Storm Prediction Center. (n.d.). Observed Sounding Archive. National Oceanic and Atmospheric Administration. Retrieved January 1, 2019.

This project is based on:

Materials and Equipment

To do this experiment you will need the following materials and equipment:

Experimental Procedure

  1. After a snowfall, pick a location to collect snow that will represent the average snow depth for the event.
  2. Place the can upside down and push it down through the snow until it reaches the ground surface.
  3. Cover the opening of the can with your plastic or sheet metal cover.
  4. Bring the can upright, carrying the snow with it. The accumulation of snow in the can should be similar to what is on the ground.
  5. Measure the snow depth on the ground (in cm), close to where the sample was taken.
  6. Bring the can inside and wait for the snow to melt.
  7. Measure the depth of the liquid water in the can (in cm).
  8. Calculate the ratio between the snow depth and the depth of the liquid water. For example, if the snow depth was 30 cm and you measured 2 cm of liquid water in the can after melting, the ratio would be 15:1 (15 cm of snow for every cm of liquid water).
  9. Repeat the measurement for several snow events.
  10. For each snow event, you will also need to examine the upper air sounding that is closest to your location and to the time of the snowfall event.
    1. Examine the temperature profile for the lower troposphere (surface to 700 millibars pressure).
    2. Upper air sounding plots are available in numerous places online, for example from the National Oceanic and Atmospheric Administration: https://www.spc.noaa.gov/exper/soundings/. You will need to find sounding data for the date of your snowfall.
    3. See the Introduction for instructions on reading the sounding plot.
  11. Is there a relationship between the temperature in the lower troposphere at the time nearest to the snowfall and the snow depth:liquid depth ratio? To find out, make graphs of snow:liquid ratio (y-axis) vs. atmospheric temperature for different pressures.
icon scientific method

Ask an Expert

Do you have specific questions about your science project? Our team of volunteer scientists can help. Our Experts won't do the work for you, but they will make suggestions, offer guidance, and help you troubleshoot.

Careers

If you like this project, you might enjoy exploring these related careers:

Career Profile
The atmosphere is a blanket of gases, surrounding Earth, that creates our weather. Meteorologists study the measurements and motion of the atmosphere, and changing events within it, so that they can predict the weather. This weather forecasting helps the general public and people who work in industries such as shipping, air transportation, agriculture, fishing, forestry, and water and power better plan for the weather, and reduce human and economic losses. Read more
Career Profile
Have you ever climbed up high in a tree and then looked at your surroundings? You can learn a lot about your neighborhood by looking down on it. You can see who has a garden, who has a pool, who needs to water their plants, and how your neighbors live. Remote sensing scientists or technologists do a similar thing, except on a larger scale. These professionals apply the principles and methods of remote sensing (using sensors) to analyze data and solve regional, national, and global problems in… Read more

News Feed on This Topic

 
, ,

Cite This Page

General citation information is provided here. Be sure to check the formatting, including capitalization, for the method you are using and update your citation, as needed.

MLA Style

Science Buddies Staff. "How Does Atmospheric Temperature Affect the Water Content of Snow?" Science Buddies, 4 Mar. 2021, https://www.sciencebuddies.org/science-fair-projects/project-ideas/Weather_p012/weather-atmosphere/how-does-atmospheric-temperature-affect-the-water-content-of-snow?from=Blog. Accessed 19 Mar. 2024.

APA Style

Science Buddies Staff. (2021, March 4). How Does Atmospheric Temperature Affect the Water Content of Snow? Retrieved from https://www.sciencebuddies.org/science-fair-projects/project-ideas/Weather_p012/weather-atmosphere/how-does-atmospheric-temperature-affect-the-water-content-of-snow?from=Blog


Last edit date: 2021-03-04
Top
We use cookies and those of third party providers to deliver the best possible web experience and to compile statistics.
By continuing and using the site, including the landing page, you agree to our Privacy Policy and Terms of Use.
OK, got it
Free science fair projects.