Bubble wand trouble
Moderators: AmyCowen, kgudger, bfinio, MadelineB, Moderators
Bubble wand trouble
My sixth graders are currently involved in a STEM unit in which they are designing (in Tinkercad) and printing (with a 3D printer) bubble wands. We have a lollipop design that does not work and we cannot figure out why. The circle is doughnut-shaped. Circles with straight sides seem to make bubbles better. Can you help us understand why? Thank you!
-
- Former Expert
- Posts: 1022
- Joined: Mon Jul 14, 2014 1:49 pm
- Occupation: retired chemist
- Project Question: Volunteer
- Project Due Date: n/a
- Project Status: Not applicable
Re: Bubble wand trouble
Hello kmiliano,
I'm guessing that a workable bubble wand needs to have enough surface area to scoop up a bit of bubble solution. Maybe the straight-sided circles work better because they have more surface area.
Perhaps one of the other experts will chime in with a better answer.
I hope this helps. Please post again if you have more questions.
A. Norman
I'm guessing that a workable bubble wand needs to have enough surface area to scoop up a bit of bubble solution. Maybe the straight-sided circles work better because they have more surface area.
Perhaps one of the other experts will chime in with a better answer.
I hope this helps. Please post again if you have more questions.
A. Norman
-
- Former Expert
- Posts: 102
- Joined: Thu Aug 17, 2017 9:23 am
- Occupation: Student
Re: Bubble wand trouble
Hi kmiliano,
Bubbles hold their shape due to a sufficient amount of surface tension. My guess is that the bubble solution has a harder time clinging to the curvature of the circle (thus reducing surface tension) than it does for the geometric shapes. I hope this is helpful!
Elena
Bubbles hold their shape due to a sufficient amount of surface tension. My guess is that the bubble solution has a harder time clinging to the curvature of the circle (thus reducing surface tension) than it does for the geometric shapes. I hope this is helpful!
Elena