HELP
Moderators: kgudger, bfinio, MadelineB, Moderators
-
- Posts: 5
- Joined: Mon Nov 12, 2007 9:35 am
HELP
Hello!!!! I am conducting the project [Using a laser pointer to measure the data track spacing in a CD] and I was wondering, when i find the data track spacing am I find the data the CD can hold or????? Im also in the process of writing my Literature Review, I am getting help from my physics teacher but if you can clarify what the data track spacing means that would help.
-
- Former Expert
- Posts: 1297
- Joined: Mon Oct 16, 2006 11:47 am
I'm not sure what you are really asking. Data is stored along a helical data track in the direction of CD rotation. What this experiment is measuring is the spacing between adjacent rotations of the same helix.when i find the data track spacing am I find the data the CD can hold or?????
In some sense you are finding out something about where one track is centered and where the next is centered or you are finding the spacing of the gap helix (where the data isn't stored) as the two helix have that same pitch.
-Craig
-
- Posts: 5
- Joined: Mon Nov 12, 2007 9:35 am
So I am finding the gap or space between the tracks isn't that called the "land" or is that something else?? Also what do you mean by the two helix have that same pitch?
im sorry if i am being difficult but I am trying to learn as mucha s i can about this topic as possible. Since not a lot of people know about it!!
im sorry if i am being difficult but I am trying to learn as mucha s i can about this topic as possible. Since not a lot of people know about it!!
-
- Former Expert
- Posts: 1297
- Joined: Mon Oct 16, 2006 11:47 am
If you take a white piece of paper and draw a helix (decreasing radius curve) with a black pencil such that the space between adjacent passes is approximately the same. What you end up with is two concentric helix. One is white (the paper) and the other is black (the pencil line).
"pits" and "lands" are the jargon used for things along the data helix (indentations and the spaces between pits). I'm not aware of the use of "lands" for the gaps between adjacent data track helix.
"pits" and "lands" are the jargon used for things along the data helix (indentations and the spaces between pits). I'm not aware of the use of "lands" for the gaps between adjacent data track helix.
-Craig
-
- Posts: 5
- Joined: Mon Nov 12, 2007 9:35 am
-
- Former Expert
- Posts: 1297
- Joined: Mon Oct 16, 2006 11:47 am
Try using the search capabilities on this site. As far as scientific importance, unless you have a hypothesis that you are testing, you aren't doing much more than a demonstration project. Read up on the scientific method on this site and see if you can come up with a hypothesis that you can test to provide some scientific relavance.
-Craig
-
- Posts: 5
- Joined: Mon Nov 12, 2007 9:35 am
-
- Posts: 5
- Joined: Mon Nov 12, 2007 9:35 am
Re: HELP
Hello!!!
I still need to know what is the data track sapcing in a CD??
Isnt't that the amount of room it has to hold data if so isn't that information already given to you like a 80 minute CD can hold about 700 MB of data!!
please help me
I still need to know what is the data track sapcing in a CD??
Isnt't that the amount of room it has to hold data if so isn't that information already given to you like a 80 minute CD can hold about 700 MB of data!!
please help me
Re: HELP
Hi,
You might have had a look at this but just wanted to post this anyway - I think this site would give you a lot of ideas - https://www.sciencebuddies.org/science- ... p011.shtml
Remember that the more number of times you repeat this (i.e. the larger the number of data sets), the better would be your result. Good luck!
vishwa
You might have had a look at this but just wanted to post this anyway - I think this site would give you a lot of ideas - https://www.sciencebuddies.org/science- ... p011.shtml
Remember that the more number of times you repeat this (i.e. the larger the number of data sets), the better would be your result. Good luck!
vishwa
Re: HELP
The track spacing is the distance between the grooves. This is what you are measuring. It is a physical quantity that relates to the amount of data that can be stored. This amount of data is measured MB or time. This way you can compare data storage capacity of different types of media like CDs, flash drives, and hard drives. 'track spacing' is only a metric for specific media- dvds, cds, etc, so while you could use track spacing to compare the capacity of a DVD to a CD, comparing 500 nm track spacing of a cd does not tell you if it holds more or less than a flash drive. Please read the science buddies project again for more information- Vishwa provided the link in the post above.physicsgenius wrote:Hello!!!
I still need to know what is the data track sapcing in a CD??
Isnt't that the amount of room it has to hold data if so isn't that information already given to you like a 80 minute CD can hold about 700 MB of data!!
please help me
Hope this helps.
Louise