Help Getting Started with Science project

AFTER you've done your research and concluded your experiments, it is time to prepare for the science fair. Ask specific questions about preparing for a science fair, including how to set up your display board, how to prepare a presentation, etc. (Please post questions about selecting a project or conducting your experiment by posting in the appropriate "area of science" forum.)

Moderators: kgudger, Moderators

Locked
Noonie
Posts: 1
Joined: Thu Apr 08, 2010 11:59 am
Occupation: student
Project Question: scientific method for which brand of ketchup pours the slowest
Project Due Date: April 22, 2010
Project Status: I am just starting

Help Getting Started with Science project

Post by Noonie »

My daughter has a science project that involves the scientific method for finding out which brand of ketchup pours the slowest. We will use 4 different brands of ketchep.
Amber_MIT
Former Expert
Posts: 260
Joined: Sat Apr 21, 2007 5:16 pm
Occupation: Volunteer
Project Question: n/a
Project Due Date: n/a
Project Status: Not applicable

Re: Hekp Getting Started with Science project

Post by Amber_MIT »

Hi Noonie,

We have a Project Guide that will walk you step by step through a science fair project using the scientific method.

Look at the sections under "How to Do a Science Fair Project" on this page: https://www.sciencebuddies.org/science- ... ndex.shtml

You need to figure out a way to accurately measure how fast each brand pours. You could get some clear narrow tubes (all the same diameter). Then pour the same amount of ketchup in each tube (not all the way to the top, maybe just a third full).

Then use a marker to mark where the ketchup started. Make a second mark near the end of the tube (measure the distance to make sure it is the same for each tube). You could then put some tinfoil into the tube to keep the ketchup in place (don't squish it, just go to the mark). Then gently turn the cylinders upside down (they need to be held vertically by something). Slowly take out the tinfoil, then measure how long it takes for each ketchup to go to the second mark on the tube.

Another way to do this: instead of putting the tubes upside down, you could put a marble into each cylinder and see how long it takes for the marble to get to the bottom. You could do this with an ordinary clear glass (might be easier than finding narrow tubes, unless you have some already).

Hope that helps!

Let us know if you have more questions.
Stuck? Check out our project guides!
Project Guide: http://www.sciencebuddies.org/science-f ... ndex.shtml
Advanced Project Guide: http://www.sciencebuddies.org/science-f ... ndex.shtml

Amber Hess
Expert
Amber_MIT
Former Expert
Posts: 260
Joined: Sat Apr 21, 2007 5:16 pm
Occupation: Volunteer
Project Question: n/a
Project Due Date: n/a
Project Status: Not applicable

Re: Help Getting Started with Science project

Post by Amber_MIT »

Here's a project that uses the marble trick I mentioned above: https://www.sciencebuddies.org/science- ... p055.shtml

The math is probably too complicated for your child, but the experimental procedure may be helpful, and instead of calculating the viscosity you could just compare the time it took for the marble to go a certain distance.
Stuck? Check out our project guides!
Project Guide: http://www.sciencebuddies.org/science-f ... ndex.shtml
Advanced Project Guide: http://www.sciencebuddies.org/science-f ... ndex.shtml

Amber Hess
Expert
Locked

Return to “Grades K-5: Getting Ready for the Science Fair”