Electricity & Electronics Science Projects (95 results)

Measuring the value of a resistor with a multimeter is pretty simple. You set the multimeter to measure resistance, connect the two leads to the resistor (possibly using some handy alligator clips), and read the resistance value. This is called a two-point measurement (one probe on each of the two resistor leads). But what if the resistance you want to measure is very small, in the milli or micro-ohm (mΩ or μΩ) range? This can introduce problems because many low-cost multimeters… Read more

Here's a puzzle you may have heard before which you can build as a simple electric circuit. First, the puzzle: a farmer is traveling to market with his cat, a chicken and some corn. He has to cross a river, and the only way to cross is in a small boat which can hold the farmer and just one of the three items he has with him. The problem is, he has to be very careful about what he chooses to leave behind at any time. If the cat and chicken are left alone, the cat will eat the chicken. If… Read more

You probably know that you can use iron filings to reveal the magnetic field produced by a strong magnet. If you sandwich the iron filings between pieces of waxed paper, you can make a permanent record of your magnetic experiments (Gardner, 2004, 66). Cover the wax paper sandwich with a layer of brown paper (from a roll, or cut open a paper shopping bag), and then (with an adult's help) use a hot, dry iron to seal the waxed paper together. You will have to experiment a little with your iron… Read more

Have you ever seen night lights that automatically turn on when it gets dark? What about art projects, like paintings or sculptures, with embedded lights? This project will let you combine the two, by adding lights to an art project of your choice. You can make the lights automatically turn on when it gets dark using a Raspberry Pi. Check out the video to see what this simple, but fun, project looks like. IMPORTANT: The instructions for this project were originally written using Scratch 2 on a… Read more

This is a good project for someone who is interested in both electronics and color vision. The equipment needed is on the expensive side, but if you continue studying electronics, you can use it again and again. Read more