Seventh Grade Science Projects (263 results)
|
Select a resource
Coding Projects
Sort by
|
How much force is required to advance a lag bolt (large wood screw with a hex-shaped head) into a piece of wood? You can measure the force by using a spring scale attached to the handle of ratchet. Pull on the spring scale until the bolt starts to turn, and note the required force from the spring scale. There are many potential experiments you could try. Think about answering the following questions: How does the force change as the bolt advances deeper into the wood? Why? How does the…
Read more
Are you good at tossing a Frisbee®? It is great when you throw a perfect, arcing curve, right on target! If you can do that, you have already trained your arm on the aerodynamics of Frisbee flight. Why not treat your brain to some Frisbee science with this project?
Read more
The insides of a car engine get very hot when the engine is running. Motor oil lubricates the moving parts, to keep the engine operating smoothly. What happens to motor oil as the engine temperature goes up?
Read more
Renewable energy is the energy that is extracted from natural sources, such the Sun (solar), earth (geothermal), wind, and water (hydropower). These sources are renewable because they can be replenished by the same natural sources within a short period of time. Hydropower energy is extracted from moving water, like ocean wave energy and tidal energy. In this energy science fair project, you will make a model of a tidal barrage (also known as a dam) and investigate how emptying the tidal barrage…
Read more
OK, spill the beans, what's your favorite bean-rich food? Burritos? Chili? Or maybe you prefer the spicy Indian stew of lentils, known as dal? But what about fried tofu? Soymilk? Or peanut butter and jelly sandwiches? Did you know those foods come from beans as well? Beans are important to the diets of many people, and in this cooking and food science fair project, you'll learn how the liquid that beans are cooked in affects how quickly or slowly they soften.
Read more
Have you ever heard that two phone books with the pages interleaved are impossible to pull apart? This might seem crazy, right? It is not that hard to slide a sheet of paper off the top of a stack of paper. How much friction can there really be between sheets of paper? In this experiment, you will use pads of sticky notes instead of phone books. How much weight can they support when you interleave the pages? Do you think you will be able to pull them apart by hand? The results might surprise…
Read more
Maybe somewhere in your home there's a long hallway or a stairway with a light that you can turn on from either end. It's a nice convenience, but did you ever wonder how it's wired up to work that way? The goal of this project is to build a similar circuit with switches, flashlight batteries and a flashlight bulb (obviously, household circuits are not safe to experiment with). You'll need to understand the difference between connections made in series and connections made in parallel in an…
Read more
Do you want to add color-changing lights to your own clothing, costume, or fashion accessory? What about making the lights flash, or adding sensors to make them automatically react to things like temperature or motion? You can do it all with sewable circuits, also called wearable electronics, that let you sew circuit parts directly into fabric. You can make anything from a basic circuit with a few LEDs up to a programmable, Arduino-compatible circuit with multiple sensor inputs and multiple…
Read more
An electric current produces a magnetic field. You can take advantage of this fact to make a simple apparatus to test the electrical conductivity of various materials, including both solids and liquids. The detector consists of a coil of wire, with a magnetic compass inside it. You connect one end of the coil to a D-cell battery. The other end of the coil is connected to whatever material you are testing, and the material, in turn, is connected to the other end of the D-cell. In other…
Read more
Can you build a volleyball machine? It will need one part to launch a ping pong ball over a net and another to return the ball. How many back-and-forth volleys can you get before the ball touches the ground? Looking for inspiration? You can see how other students have tackled this and other annual Science Buddies Engineering Challenges.
Teachers, lesson plan versions of this challenge are available.
Read more
|












