/-/https/www.sciencebuddies.org/cdn/Files/21464/5/sb-logo.png){kind=logo}
/-/https/www.sciencebuddies.org/cdn/Files/21464/5/sb-logo.png){kind=logo}
Stretch and Break Materials Science Projects (25 results)
|
Noise is everywhere. From the clanking of a cowbell to the din of the lunchroom, we are surrounded by noise. Sometimes there's no way to get away from it, but there is a way to deal with it—constrained-layer damping. By simply creating a layered sandwich of somewhat flexible materials, what was once a noisy cowbell can become a "noise blanket." This science fair project shows you how to transform a noisy piece of metal into a sound-muffling constrained-layer damper. You'll record the…
Read more
What are the best materials to use for blocking out unwanted noise from the environment? You can build a test box (or test frame) around an audio speaker. Use a sound level meter to measure the speaker output. Use different materials to cover the walls of your test box (or frame), and see which materials do the best job at blocking the sound. For a more advanced project, perform your tests using different sound frequencies. Are some materials better at blocking certain frequencies than…
Read more
If you like to fish and you'd rather not be telling the story of "the one that got away," then this is a project for you. What combination of properties makes for the best fishing line? Here are some suggestions for getting started on your background research into fishing line properties: knot strength, abrasion strength, shock strength, tensile strength, limpness, controlled stretch, and desired range of visibility (Dodson, 2006). Choose the properties that you think are most important, and…
Read more
Does your hair go crazy when the weather turns damp? Did you know that strands of hair can relax and lengthen when the humidity increases and then contract again when the humidity decreases? In fact, hair strands can be used as the basis for a hygrometer, a device which measures the humidity level in the air. Can a human hair hygrometer also detect changes in hair structure caused by chemical lightening? This project shows you how to find out.
Read more
Does your hair go crazy when the weather turns damp? Did you know that strands of hair can relax and lengthen when the humidity increases and then contract again when the humidity decreases? In fact, hair strands can be used as the basis for a hygrometer, a device which measures the humidity level in the air. Will a hygrometer help you to predict bad hair days(!) or can you use it to help predict the weather?
Read more
The insides of a car engine get very hot when the engine is running. Motor oil lubricates the moving parts, to keep the engine operating smoothly. What happens to motor oil as the engine temperature goes up?
Read more
How much force does it take to drive a nail through different types of wood? In this project you'll build a simple test apparatus to swing a hammer reproducibly so you can find out.
Read more
Try gluing wood together with different types of glue, e.g.: regular white glue, yellow wood glue, cyanoacrylate (super glue), and Liquid Nails. Glue a short piece (5-8 cm) to the center of a longer piece (15-30 cm). After the glue has dried for the recommended time, drill a small hole through the center of the joint, big enough to pass through a piece of coat-hanger wire. Cut a length of coat hanger wire, pass it through the hole, and twist the ends together to form a loop. Place the ends…
Read more
Chances are, you have several materials around your house made of gelatinized materials. Gels are used in all kinds of products and materials: pudding, diapers, insoles, packaging, ice cream, toothpaste, and many more. In this project, find out how gels are made and how they can be adjusted from firm to soft by changing the ingredients.
Read more
How much force can a rubber band withstand before breaking? Do rubber bands that stretch longer take more or less force to break? How does the elasticity of a rubber band change with temperature? Use a spring scale to measure the applied force, and a meter stick or ruler to measure the change in length. Recording with a video camera (or possibly two) can help you to capture the values at the moment before the rubber band breaks. You can change the temperature of the rubber bands using…
Read more
|
/-/https/www.sciencebuddies.org/cdn/Files/20483/6/icon-flask.png){kind=icon}
/-/https/www.sciencebuddies.org/cdn/Files/3465/5/ApMech_img044.jpg)
/-/https/www.sciencebuddies.org/cdn/Files/2823/3/Chem_img018.gif)
/-/https/www.sciencebuddies.org/cdn/Files/2828/3/MatlSci_img048.gif)
/-/https/www.sciencebuddies.org/cdn/Files/2946/3/ApMech_img026.jpg)
/-/https/www.sciencebuddies.org/cdn/Files/2602/3/MatlSci_img041.jpg)
/-/https/img.youtube.com/vi/YxOSHj_kVlA/0.jpg)
/-/https/img.youtube.com/vi/mn_-XdmyMuA/0.jpg)
/-/https/img.youtube.com/vi/xIjMYB_qNOI/0.jpg)