Arduino Science Projects (Page 6)

How Do You Know Where You Are Without GPS? Dead Reckoning and Inertial Navigation

Science Fair Project Idea

Engineering Design Process

Put a meter stick on the ground. Starting at one end of the stick, close your eyes and try to walk exactly one meter. Open your eyes. How close were you? Now try it again with five, ten, or twenty meters. Does it get harder as the distance gets bigger? Without an outside reference from your visual system, it's quite difficult to know exactly how far you've gone! Electronic navigation systems face the same problem. Without an external reference like the global positioning system (GPS), it's very… Read more

Build an Arduino Robot

Science Fair Project Idea

Engineering Design Process

The Science Buddies Bluebot Kit contains parts to build four different robots: A motion-activated robot that uses a passive infrared (PIR) sensor A light-tracking robot that uses photoresistors A line-following robot that uses infrared emitter-detectors An obstacle-avoiding robot that uses bump sensors However, in each project, the sensors are hard-wired to control the robot's motors. This allows the robot to steer left and right based on input from two sensors, but it does not allow the… Read more

How Does Robot Behavior Affect Human-Robot Interaction?

Science Fair Project Idea

Scientific Method

Industrial robots, medical robots, service robots, household robots, companion robots—humans and robots are around each other in an ever-increasing number of situations. How robots look and act can have a big impact on how humans react to and feel about them. In this science project, you will program a robot with different behaviors to see how people react. Can you make people feel comfortable alongside the robot? Read more

Build a Color-Detecting Rover

Science Fair Project Idea

Engineering Design Process

The Mars Curiosity and Perseverance rovers use scientific instruments, nicknamed ChemCam (Figure 1) and SuperCam respectively, to help them analyze the composition of rocks and soil on Mars. You can learn more about these cameras from the resources in the Bibliography, and more about why scientists want to analyze rocks on Mars from the video on this page. Figure 1. The two main parts of the ChemCam instrument on the Mars Curiosity rover. For a science… Read more

Build a Light-Up Activity Timer

Science Fair Project Idea

Engineering Design Process

Do you have trouble remembering when to stop playing and clean up? Have you ever had little kids throw a tantrum about cleaning up while you were babysitting? If so, this project is for you! You will convert a stuffed animal into a light-up activity timer. You can use the timer for different activities like play, exercise, or doing homework. What you use it for is up to you! Read more

Design Clothing with Built-In Sensors

Science Fair Project Idea

Engineering Design Process

Have you ever worn a costume that lit up or played sound? Have you ever wished you had a suit of armor with built-in moving parts like a superhero? What if you could make your costume or suit react to your own movements or even other people who bump into you? The Science Buddies activity Weaving a Wearable Touch Sensor shows you how to make a capacitive sensor that responds to touch and can be woven directly into fabric (Figure 1). Can you design a piece of clothing that includes one… Read more

Soft Robots with Built-In LEDs

Science Fair Project Idea

Engineering Design Process

Check out the soft robotic gripper and artificial robotic skin projects. These projects show you how to use flexible silicone rubber to make robots or robotic parts. The second project shows you how to connect external LEDs using an Arduino. The LEDs light up when an embedded piece of conductive fabric stretches. What about embedding LEDs in the silicone rubber? You can do this by embedding the LEDs between layers of silicone (Figure 1). The trick is to solder flexible stranded wires to the… Read more

Arduino Science Projects (57 results)