Industry, Innovation and Infrastructure, High School, Electricity & Electronics Science Projects (Page 3)

LED Traffic Glove: Build a Safety Device to Direct Traffic

Science Fair Project Idea

Scientific Method

From traffic safety lights to neon signs, lights have a way of getting peoples' attention. So it makes sense that if a person wants to get attention, wearing clothing with built-in lights might help. These types of clothing, called electronic textiles (e-textiles for short), or wearable electronics, already exist. Instead of using hard surfaces for circuits (like inside your computer or cell phone), e-textiles weave electrical parts like batteries, wires, and lights directly into wearable… Read more

Build an Arduino Strobe Light for the Stroboscopic Effect

Science Fair Project Idea

Engineering Design Process

The Science Buddies project Build a Levitating Water Fountain with the Stroboscopic Effect shows you how to illuminate a dripping stream of water with a strobe light to make it look like the drops are hovering in mid-air. If you have not already, read the background section of that project and watch the following two videos. Make sure you understand frequency, period, and duty cycle before you proceed with this project. The project has you use a strobe light app on your phone. The advantage… Read more

Build a Wearable Device Using an Arduino to Keep Astronauts Safe on Mars

Science Fair Project Idea

Engineering Design Process

Astronauts on Mars missions must be protected from hazardous environments, like steep cliffs, rocky terrain, and extreme temperature variations. How can geofencing help? In this project, you will design a system that uses geofencing technology coupled with biosensors to ensure astronaut safety. The system will create a virtual boundary around astronauts, providing alerts if they approach dangerous areas or leave designated safe zones, or if their vital signs fall below a certain threshold. Can… Read more

Smart Medicine Cabinet: Build a Sensor That Reminds Patients When to Take Medication

Science Fair Project Idea

Scientific Method

Have you ever had to take prescription medicine to get over an illness? To get better, it is important to take the medication in the proper manner and at the proper time. Wouldn't it be cool if there were a tool or piece of automated equipment that held your medicine and reminded you to take it? A tool that would know when you picked up the bottle and took your medicine? Building a smart medicine cabinet is what this science project is all about! Read more

How Does LED Brightness Vary with Current?

Science Fair Project Idea

Scientific Method

LEDs (light-emitting diodes) are electronic components that convert a portion of the electrical energy flowing through them into light. How does the intensity of the light produced vary with the current flowing through the LED? To find out, you'll build some simple circuits to vary the current flowing an LED. You'll also build a simple light-to-voltage converter circuit to measure LED output. Read more

How Far Can Sparks Jump?

Science Fair Project Idea

Scientific Method

Piezoelectric barbecue fire starters work by creating a spark that ignites the volatile lighter fluid, which then starts the charcoal burning. They are low current, high voltage devices. How high does the voltage have to get to make a spark in air? This project shows you a way to find out by with an inexpensive experimental setup to measure the distance that the spark can travel between two spherical electrodes. Read more

Wire Wilt: How Light-Emitting Diodes Fade As Temperature Increases

Science Fair Project Idea

Scientific Method

What's your favorite thing to do on the hottest day of the year? Dip your toes in an icy river? Hang out by the pool? Retreat to a cool basement? Lie motionless in the shade? You're probably not too eager to move around and put out a lot of energy, like mowing the lawn in the mid-afternoon sun. Well, you're not the only one. In this electronics science fair project, you'll find out that some semiconductor devices, like light-emitting diodes (or LEDs), act the same way. As their internal… Read more

Design Clothing with Built-In Sensors

Science Fair Project Idea

Engineering Design Process

Have you ever worn a costume that lit up or played sound? Have you ever wished you had a suit of armor with built-in moving parts like a superhero? What if you could make your costume or suit react to your own movements or even other people who bump into you? The Science Buddies activity Weaving a Wearable Touch Sensor shows you how to make a capacitive sensor that responds to touch and can be woven directly into fabric (Figure 1). Can you design a piece of clothing that includes one… Read more

Linear vs. Logarithmic Changes: What Works Best for Human Senses?

Science Fair Project Idea

Scientific Method

If you want to get your friend's attention at a crowded sporting event with lots of people cheering, you need to shout. If you're trying to do the same thing in a quiet library, a whisper works. The detection limit for each of our senses depends on the amount of "background" stimulation that is already present. This project uses an LED control circuit to investigate detection of changes in light levels. Read more

Build a Reed Switch Motor

Science Fair Project Idea

Scientific Method

Motors are used in many things you find around your house, like your refrigerator, coffee maker, and even a lawn mower. In this electronics science fair project, you will get to build a simple motor, using a kit, and then test how the number of batteries (amount of voltage) used to power the motor affects its performance. Read more

Industry, Innovation and Infrastructure, High School, Electricity & Electronics Science Projects (36 results)

Explore Our Science Videos