Experiment in Civil Engineering Science Projects (21 results)
Experience civil engineering on a smaller scale-- what it is like to keep people safe as they live and work and travel from place to place. Design a structure and see how it stands up to testing. Use the geometry you learned in school to make your designs stronger. Test the strength of construction materials used or soils supporting buildings.
|
Build model bridges and then deliberately destroy them? Who'd be crazy enough to try that?
Read more
The wind is a powerful force, enough to erode whole hillsides over time. Building structures in windy environments challenge civil engineers with special safety concerns. A wall in a windy area can either shield you from the cold or fall down on you. Learn a few tricks on how to design walls in windy places.
Read more
Foundations for many types of structures rest on soil. This project shows how you can investigate the bearing capacity of different types of soil.
Read more
Predict how tall you can build a tower using only two sheets of newspaper as building material. You can't use tape, glue, staples, or anything else, just two sheets of newspaper. You can tear, bend, cut, or fold the newspaper. Try it out and see how close you can come to your prediction. Can you beat your prediction? As you're building, you may come up with ideas to make a better tower. Try them out! (It's not like the materials are expensive!) Here are some variations you might want to…
Read more
How much force does it take to drive a nail through different types of wood? In this project you'll build a simple test apparatus to swing a hammer reproducibly so you can find out.
Read more
Sorry, you don't get to use a jackhammer for this project, but you'll find out another way to break concrete (not to mention what makes it strongest).
Read more
Skyscrapers are impressive structures. What does it take to design a building so tall? Engineers use strong materials and innovative design to push the limits of gravity. They use special tables to simulate earthquakes and test models of their buildings. In this project, you will build your own earthquake table and see how tall you can make a tower out of LEGO® bricks. You can even measure how hard your earthquake table shakes using the accelerometer of your smartphone and a sensor app.
Read more
Try gluing wood together with different types of glue, e.g.: regular white glue, yellow wood glue, cyanoacrylate (super glue), and Liquid Nails. Glue a short piece (5-8 cm) to the center of a longer piece (15-30 cm). After the glue has dried for the recommended time, drill a small hole through the center of the joint, big enough to pass through a piece of coat-hanger wire. Cut a length of coat hanger wire, pass it through the hole, and twist the ends together to form a loop. Place the ends…
Read more
Here's a fun project idea to learn about compression forces. For this experiment you'll need some empty toilet paper tubes, masking tape, sand (or table salt), pebbles (or marbles), a funnel, a cardboard box, and a sturdy chair to help you balance while testing the column. Seal one end of the tube with masking tape. Use the funnel to fill the tube with sand (or salt). Seal the other end with tape. Place the tube on end inside the paper box. Place the chair with its back to the box and hold…
Read more
Suspension bridges, with their tall towers, long spans, and gracefully curving cables, are beautiful examples of the work of civil engineers. How do the cables and towers carry the load that is on the bridge? Can a suspension bridge carry a greater load than a simple beam bridge? This science project shows you how to find out.
Read more
|












