Eighth Grade, Aerodynamics & Hydrodynamics Science Projects (28 results)
|
Select a resource
Coding Projects
Sort by
|
Have you ever seen those cool wind tunnel pictures of cars with streams of smoke blowing over them? You do not need access to a wind tunnel to do a car aerodynamics science project! In this project you will use cheap, readily available materials—tape and yarn—to visualize airflow over a car. You will examine how you can affect the airflow over the car by making changes, like adding or removing accessories or making body modifications out of cardboard and duct tape. Maybe you can…
Read more
You have probably made plenty of regular paper airplanes simply by folding a piece of printer or notebook paper. Have you ever tried making a "high performance" paper glider? These gliders use a different construction technique that involves cutting multiple shapes out of thicker, stiffer paper and gluing them together (this process is called lamination). There are many resources online that can get you started with the art of making high performance paper gliders. See the references in the…
Read more
How does a helicopter generate enough lift to fly? How does a speedboat get moving fast enough to pull someone on water skis? Here's a project on designing propellers to do the job.
Read more
Race car drivers need every advantage they can get to give them the competitive edge in a race. In addition to human factors, like driving skill and reaction time, their cars must overcome physical forces, like air resistance, to maintain their high speeds. While this science project will not have you driving around a race track at 200 miles per hour, you will get to test how increased air resistance affects a real car's fuel economy. You will do this by measuring and comparing the gas mileage…
Read more
Are you good at tossing a Frisbee®? It is great when you throw a perfect, arcing curve, right on target! If you can do that, you have already trained your arm on the aerodynamics of Frisbee flight. Why not treat your brain to some Frisbee science with this project?
Read more
Rocket design and operation is a fascinating field and analyzing the flight path provides insight into the rocket's performance. In this project, you will take measurements of the flight path to evaluate how a change in the rocket design or launch procedure impacts the rocket's performance.
Initially, while the bottle rocket expels water (or the rocket expels exhaust), the rocket gets a boost. This push is referred to as thrust and projects the rocket forward. Earth's gravity pulls the rocket…
Read more
You can measure the viscosity of a fluid using a glass tube and a marble with slightly smaller diameter than the tube. Seal one end of the tube. Fill the tube with the fluid to be tested. Drop the marble into to the tube and measure the time it takes to fall a fixed distance. Repeat the measurement several times, and use the average value. How does viscosity change with the amount of sugar dissolved in water? How does viscosity change with temperature?
Read more
If you have an air hockey table, you know that the puck floats on a thin cushion of air when the table is turned on. With little friction, the puck can travel very fast. How much lift force is created by the air? Add small amounts of weight to the puck and see when it no longer floats to measure the lift force. How many air holes (on average) support the puck? How much force is generated by each air hole? Will a puck with a larger surface area, supported by more air holes (on average),…
Read more
Have you ever flown in an airplane, or looked up at one flying in the sky, and wondered how such a massive machine can stay in the air? Airplanes can stay in the air because their wings, also referred to as airfoils, generate lift. Engineers use devices called wind tunnels to experiment and test different wing shapes when they design new airplanes. Wind tunnels let engineers make careful measurements of the air flow around the wing, and measure the amount of lift it generates.
If you can get…
Read more
Try different wind turbine/propeller (chord length, pitch) designs by making models from balsa wood. Connect the spinning axle to a DC motor and measure the voltage produced across a resistor to measure power output. Use fan as wind source. (Judge, 2004)
Read more
|










