Civil Engineering Science Projects (26 results)
|
Select a resource
Coding Projects
Sort by
|
This project idea is inspired by former NASA engineer Mark Rober's "Squirrel Ninja Obstacle Course".
You do not need to build a full obstacle course as intricate as Mark's (although you certainly can if you want to!) to make this into a fun science project. For example, how far can squirrels jump? You could test this question by building a mobile post and placing it next to a bird feeder. The bird feeder in Figure 1 is mounted on a metal pole. The pole is protected by a squirrel baffle, a…
Read more
Sorry, you don't get to use a jackhammer for this project, but you'll find out another way to break concrete (not to mention what makes it strongest).
Read more
Try gluing wood together with different types of glue, e.g.: regular white glue, yellow wood glue, cyanoacrylate (super glue), and Liquid Nails. Glue a short piece (5-8 cm) to the center of a longer piece (15-30 cm). After the glue has dried for the recommended time, drill a small hole through the center of the joint, big enough to pass through a piece of coat-hanger wire. Cut a length of coat hanger wire, pass it through the hole, and twist the ends together to form a loop. Place the ends…
Read more
For a colony of humans to survive and thrive on Mars, they will need to make the most of what is available on Mars. We know from prior space missions what the Martian ground cover looks like. In this project, you will see if this ground cover can be transformed into strong construction material.
The first requirement for construction material is that it is strong so it does not collapse under its own weight. Because the mass of Mars is about 10 times less than the mass of Earth, its…
Read more
There are many types of construction materials used for wood-frame houses. Compare the different uses for and strengths of different building materials, e.g.: particle board,
plywood, pine, oriented strand board (OSB), and drywall (gypsum board, SheetRock). The Science Buddies Materials Science Resource Stress, Strength and Strain will be helpful for learning about different ways to measure material strength. You should be sure to use the same cross-sectional area of each material in order…
Read more
How strongly do different types of nails hold in wood? Try different diameters of nails, and try pounding them to different depths. To gauge the holding strength, measure how difficult it is to remove the nail. Can you pull it out with a pair of pliers? Can you remove it with the hammer claw? Do you have to push only a little bit, moderately hard, or as hard as you can? Do you need a crowbar? What happens if you pre-drill holes for the nails, using drill bits that are different…
Read more
|








