Industry, Innovation and Infrastructure, Seventh Grade, Electricity & Electronics Science Projects (Page 2)

Engineer an LED Night-Light

Science Fair Project Idea

Engineering Design Process

Night-lights can be found in many homes; you might even have one in your bedroom! Using a night-light is a great way to avoid stubbing your toe on furniture during a midnight trip to the bathroom. In this fun engineering project, you will design and build your own night-light. You will need to build the circuit, but you will also need to think about the physical design of the product. Most people probably do not want an ugly, bare circuit board sitting around their house. Can you make a… Read more

LED Traffic Glove: Build a Safety Device to Direct Traffic

Science Fair Project Idea

Scientific Method

From traffic safety lights to neon signs, lights have a way of getting peoples' attention. So it makes sense that if a person wants to get attention, wearing clothing with built-in lights might help. These types of clothing, called electronic textiles (e-textiles for short), or wearable electronics, already exist. Instead of using hard surfaces for circuits (like inside your computer or cell phone), e-textiles weave electrical parts like batteries, wires, and lights directly into wearable… Read more

Build an Arduino Strobe Light for the Stroboscopic Effect

Science Fair Project Idea

Engineering Design Process

The Science Buddies project Build a Levitating Water Fountain with the Stroboscopic Effect shows you how to illuminate a dripping stream of water with a strobe light to make it look like the drops are hovering in mid-air. If you have not already, read the background section of that project and watch the following two videos. Make sure you understand frequency, period, and duty cycle before you proceed with this project. The project has you use a strobe light app on your phone. The advantage… Read more

Smart Medicine Cabinet: Build a Sensor That Reminds Patients When to Take Medication

Science Fair Project Idea

Scientific Method

Have you ever had to take prescription medicine to get over an illness? To get better, it is important to take the medication in the proper manner and at the proper time. Wouldn't it be cool if there were a tool or piece of automated equipment that held your medicine and reminded you to take it? A tool that would know when you picked up the bottle and took your medicine? Building a smart medicine cabinet is what this science project is all about! Read more

How Does LED Brightness Vary with Current?

Science Fair Project Idea

Scientific Method

LEDs (light-emitting diodes) are electronic components that convert a portion of the electrical energy flowing through them into light. How does the intensity of the light produced vary with the current flowing through the LED? To find out, you'll build some simple circuits to vary the current flowing an LED. You'll also build a simple light-to-voltage converter circuit to measure LED output. Read more

How Far Can Sparks Jump?

Science Fair Project Idea

Scientific Method

Piezoelectric barbecue fire starters work by creating a spark that ignites the volatile lighter fluid, which then starts the charcoal burning. They are low current, high voltage devices. How high does the voltage have to get to make a spark in air? This project shows you a way to find out by with an inexpensive experimental setup to measure the distance that the spark can travel between two spherical electrodes. Read more

Use Sewable Circuits to Make Cool Costumes and Accessories

Science Fair Project Idea

Engineering Design Process

Do you want to add color-changing lights to your own clothing, costume, or fashion accessory? What about making the lights flash, or adding sensors to make them automatically react to things like temperature or motion? You can do it all with sewable circuits, also called wearable electronics, that let you sew circuit parts directly into fabric. You can make anything from a basic circuit with a few LEDs up to a programmable, Arduino-compatible circuit with multiple sensor inputs and multiple… Read more

Build a Reed Switch Motor

Science Fair Project Idea

Scientific Method

Motors are used in many things you find around your house, like your refrigerator, coffee maker, and even a lawn mower. In this electronics science fair project, you will get to build a simple motor, using a kit, and then test how the number of batteries (amount of voltage) used to power the motor affects its performance. Read more

Simple Circuit Logic with Switches: An Electric Puzzle

Science Fair Project Idea

Scientific Method

Here's a puzzle you may have heard before which you can build as a simple electric circuit. First, the puzzle: a farmer is traveling to market with his cat, a chicken and some corn. He has to cross a river, and the only way to cross is in a small boat which can hold the farmer and just one of the three items he has with him. The problem is, he has to be very careful about what he chooses to leave behind at any time. If the cat and chicken are left alone, the cat will eat the chicken. If… Read more

Invent an Interactive Toy with a Raspberry Pi

Science Fair Project Idea

Scientific Method

Did you ever have a favorite toy like an action figure or doll that could light up, make noise, or move? This project will show you how to make your own interactive toy using a Raspberry Pi. Check out the video to see what this simple, but fun, project looks like. The version you make does not have to be a robot; it can be any shape and have any sound effects you want. IMPORTANT: The instructions for this project were originally written using Scratch 2 on a Raspberry Pi 3B+. If you are using a… Read more

Industry, Innovation and Infrastructure, Seventh Grade, Electricity & Electronics Science Projects (22 results)

Explore Our Science Videos