Sixth Grade, Electricity & Electronics Science Projects (Page 3)

How Far Can Sparks Jump?

Science Fair Project Idea

Scientific Method

Piezoelectric barbecue fire starters work by creating a spark that ignites the volatile lighter fluid, which then starts the charcoal burning. They are low current, high voltage devices. How high does the voltage have to get to make a spark in air? This project shows you a way to find out by with an inexpensive experimental setup to measure the distance that the spark can travel between two spherical electrodes. Read more

How Much Current Does It Take To Blow Up An LED?

Science Fair Project Idea

Scientific Method

Have you ever accidentally burned out an LED while building a circuit? What about doing it on purpose—for science, of course! In this science project, you will intentionally send too much current through LEDs to see if they will burn out or even explode! How much current does it take to destroy an LED? How does this compare to the LED's rated current value? Try this project and find out! Check out this page for more LED science projects. Read more

How Well Do Different Materials Create Static Electricity?

Science Fair Project Idea

Scientific Method

When your parents were kids, they probably wore polyester. Static cling was a major household issue! Now everybody wears cotton, which does not get static cling nearly as much. Why are some materials more susceptible to static cling than others? Investigate how well different materials produce static electricity by making a homemade electroscope and testing it out in this science project. Read more

Human-Powered Energy

Science Fair Project Idea

Scientific Method

You have probably read all about forms of alternative energy like solar and wind power. But what about human power? With the aid of a coil of wire and some magnets, you can generate electricity with nothing more than a flick of your wrist. In this project, you will build a small hand-powered electrical generator that can power a series of tiny lights. Get ready to save the planet and get some exercise at the same time! Read more

Invent an Interactive Toy with a Raspberry Pi

Science Fair Project Idea

Scientific Method

Did you ever have a favorite toy like an action figure or doll that could light up, make noise, or move? This project will show you how to make your own interactive toy using a Raspberry Pi. Check out the video to see what this simple, but fun, project looks like. The version you make does not have to be a robot; it can be any shape and have any sound effects you want. IMPORTANT: The instructions for this project were originally written using Scratch 2 on a Raspberry Pi 3B+. If you are using a… Read more

LED Dance Glove: Get the Party Started with Your Own Interactive Light Show

Science Fair Project Idea

Scientific Method

Have you ever seen clothing with built-in lights? This might sound like something out of a science-fiction movie, but electronic textiles (>e-textiles for short, also called wearable electronics or sewable circuits) really exist. Instead of using hard surfaces for circuits (like what goes inside your computer or cell phone), e-textiles weave electrical parts like batteries, wires, and lights directly into clothing that you can wear to make the clothing do fun, interesting things like light… Read more

LED Traffic Glove: Build a Safety Device to Direct Traffic

Science Fair Project Idea

Scientific Method

From traffic safety lights to neon signs, lights have a way of getting peoples' attention. So it makes sense that if a person wants to get attention, wearing clothing with built-in lights might help. These types of clothing, called electronic textiles (e-textiles for short), or wearable electronics, already exist. Instead of using hard surfaces for circuits (like inside your computer or cell phone), e-textiles weave electrical parts like batteries, wires, and lights directly into wearable… Read more

Make a Glitter Surprise Package

Science Fair Project Idea

Engineering Design Process

Have you ever seen a video of a glitter prank package? They usually show an unsuspecting person opening a package or a gift, only to be sprayed by a shower of glitter. Former NASA engineer Mark Rober got tired of thieves stealing packages off his porch, so he decided to build an elaborate decoy glitter package*, as he shows in this video. Mark's device involves a lot of custom software, electronics, and 3D printing, so might seem a little intimidating if you are new to engineering. The summary… Read more

Make a Pomodoro Study Clock

Science Fair Project Idea

Engineering Design Process

The Pomodoro technique is a popular study method consisting of alternating study sessions and breaks. In this engineering project you will build your own customized Pomodoro timer or clock using an Arduino. In addition to displaying the time, you can use your clock to display messages or get the user's attention using lights, sound, or even moving parts. Can you work more efficiently with a Pomodoro timer at your side? Build one and find out! Read more

Make an Adaptive Switch

Science Fair Project Idea

Engineering Design Process

How could you send a text message without using your thumbs? What about typing on a keyboard or using a video game controller without using your fingers? Due to a variety of medical conditions like cerebral palsy or paralysis from an accident, some people might be unable to easily use their hands and fingers to push small buttons or use joysticks. However, they might be able to use their entire hand to push a single larger button or use another part of their body like their foot or even their… Read more

Sixth Grade, Electricity & Electronics Science Projects (45 results)

Explore Our Science Videos