Industry, Innovation and Infrastructure, Tenth Grade, Electricity & Electronics Science Projects (Page 2)

Build a Model Mass Driver for Launching Objects into Space

Science Fair Project Idea

Scientific Method

A mass driver uses electromagnetics to launch projectiles. In the future, such a device could launch payloads into space without the use of chemical rockets. This could lead to long-term cost savings when launching large amounts of material into space—for example, to construct a space station. In this project you will design and build your own working model mass driver as you learn some of the engineering principles behind how mass drivers operate. Read more

Electric Paint: Light Up Your Painting

Science Fair Project Idea

Scientific Method

Electric paint is a fun way to include a circuit with lights in an art project, but it presents a challenge not found in traditional electronic circuits. What happens if you change the length or width of your strokes of paint, such as by painting longer, curvier lines or using a thicker brush? Could this affect the electrical properties of your circuit? Try this project to find out! Read more

Measuring Magnetic Fields

Science Fair Project Idea

Scientific Method

Have you ever noticed how magnets appear to have no effect on each other when they are far apart? Then, when you slowly move them closer together, you will start to feel a gentle pull until they suddenly snap together? How exactly does the strength of a magnet change with distance, and how would you measure it if you wanted to find out? In this project you will build a circuit that can measure the strength of a magnetic field and see how the field strength changes with distance. Read more

Design Your Own Smart LED Lighting System

Science Fair Project Idea

Engineering Design Process

Have you ever had lights turn on automatically when you walked into a room? Have you turned on a light with your voice instead of a switch? Maybe you have even seen lights that change color depending on temperature, ambient sounds, or how close you are to something. In this project you will design and build your own smart LED lighting system that can change colors and react to various things in the room. The possibilities are endless! Check out this page for more LED science projects. Read more

A Robot Waiter That Can Carry Drinks

Science Fair Project Idea

Engineering Design Process

Have you ever seen a waiter balance an entire tray of drinks without spilling any? How do they do it? Do you think you could build a robot waiter that can do the same thing? In this project, you will learn how to build a self-balancing robotic tray. You can incorporate the auto-leveling tray into one of our many other robotics projects, like the Bluebot or robotic arm. Read more

Color Mixing with Red, Green, & Blue LEDs

Science Fair Project Idea

Scientific Method

This is a good project for someone who is interested in both electronics and color vision. The equipment needed is on the expensive side, but if you continue studying electronics, you can use it again and again. Read more

Testing a Parabolic Reflector with Light from an LED

Science Fair Project Idea

Scientific Method

You can see examples of parabolic reflectors in flashlights, car headlights, satellite TV antennas, and even on the sidelines at football games. How do these "dish" antennas work to gather signals? What is the best position for placing the detector for these antennas? In this project, you can use an LED and a simple photodetector to find out for yourself. Read more

Linear vs. Logarithmic Changes: What Works Best for Human Senses?

Science Fair Project Idea

Scientific Method

If you want to get your friend's attention at a crowded sporting event with lots of people cheering, you need to shout. If you're trying to do the same thing in a quiet library, a whisper works. The detection limit for each of our senses depends on the amount of "background" stimulation that is already present. This project uses an LED control circuit to investigate detection of changes in light levels. Read more

Build a Wearable Device Using an Arduino to Keep Astronauts Safe on Mars

Science Fair Project Idea

Engineering Design Process

Astronauts on Mars missions must be protected from hazardous environments, like steep cliffs, rocky terrain, and extreme temperature variations. How can geofencing help? In this project, you will design a system that uses geofencing technology coupled with biosensors to ensure astronaut safety. The system will create a virtual boundary around astronauts, providing alerts if they approach dangerous areas or leave designated safe zones, or if their vital signs fall below a certain threshold. Can… Read more

Wire Wilt: How Light-Emitting Diodes Fade As Temperature Increases

Science Fair Project Idea

Scientific Method

What's your favorite thing to do on the hottest day of the year? Dip your toes in an icy river? Hang out by the pool? Retreat to a cool basement? Lie motionless in the shade? You're probably not too eager to move around and put out a lot of energy, like mowing the lawn in the mid-afternoon sun. Well, you're not the only one. In this electronics science fair project, you'll find out that some semiconductor devices, like light-emitting diodes (or LEDs), act the same way. As their internal… Read more

Industry, Innovation and Infrastructure, Tenth Grade, Electricity & Electronics Science Projects (24 results)

Explore Our Science Videos