Twelfth Grade, Electricity & Electronics Science Projects (Page 2)

Build a Magnetic Pet Door

Science Fair Project Idea

Engineering Design Process

Does your home have any pet doors or gates for dogs, cats, or other animals? Some automatic pet doors can be set up to allow only certain animals through. These doors can help you control which pets are able to go outside alone or which ones have access to specific food, litter boxes, or toys. But why buy such a door when you can make one? In this project you will build your own automatic pet door that works with a magnetic collar tag. Exactly how you use it is up to you! Read more

Build Your Own Radon Detector

Science Fair Project Idea

Scientific Method

Electronic devices can be designed to detect dangerous fumes or other hazards, such as smoke or carbon monoxide. In this electronics project, you will build another potentially life-saving detector—a radon detector. Radon gas is radioactive and can pose a hazard to your health if you live in an area where it leaks from the ground. In this electronics science project, you will learn how to collect radon with an ordinary dusting cloth mounted on the intake of a fan, and then measure its… Read more

Efficient LED Circuit Design

Science Fair Project Idea

Engineering Design Process

LED lighting can add a cool ambient effect to a room, a device, or even the inside of a car. You may know that LED lights are more efficient than incandescent bulbs, but do you know how to design and build your own LED circuit? How would you minimize power consumption and maximize efficiency? In this project you will learn how to design and build your own LED circuits so you can add LED lighting effects wherever you want. Check out this page for more LED science projects. Read more

Build a Wearable Device Using an Arduino to Keep Astronauts Safe on Mars

Science Fair Project Idea

Engineering Design Process

Astronauts on Mars missions must be protected from hazardous environments, like steep cliffs, rocky terrain, and extreme temperature variations. How can geofencing help? In this project, you will design a system that uses geofencing technology coupled with biosensors to ensure astronaut safety. The system will create a virtual boundary around astronauts, providing alerts if they approach dangerous areas or leave designated safe zones, or if their vital signs fall below a certain threshold. Can… Read more

How Do You Know Where You Are Without GPS? Dead Reckoning and Inertial Navigation

Science Fair Project Idea

Engineering Design Process

Put a meter stick on the ground. Starting at one end of the stick, close your eyes and try to walk exactly one meter. Open your eyes. How close were you? Now try it again with five, ten, or twenty meters. Does it get harder as the distance gets bigger? Without an outside reference from your visual system, it's quite difficult to know exactly how far you've gone! Electronic navigation systems face the same problem. Without an external reference like the global positioning system (GPS), it's very… Read more

Build a Model Satellite with Arduino

Science Fair Project Idea

Engineering Design Process

Have you ever wondered how satellites steer themselves? How can a spy satellite aim its camera? How can a satellite keep its solar panels oriented toward the sun? In this project, you will learn about one method satellites use to control their orientation, called a reaction wheel, and build your own working prototype of a miniature satellite. Read more

Recording on a Wire

Science Fair Project Idea

Scientific Method

Today magnetic recording is used in audio and video cassette recorders, and computer disk drives. Did you know that you can also use an electromagnet to record and play back from a steel wire? In fact, this is how magnetic recording got started. This project shows you how to build a simple wire recorder. Read more

Two-Point and Four-Point Methods for Measuring Small Resistances

Science Fair Project Idea

Scientific Method

Measuring the value of a resistor with a multimeter is pretty simple. You set the multimeter to measure resistance, connect the two leads to the resistor (possibly using some handy alligator clips), and read the resistance value. This is called a two-point measurement (one probe on each of the two resistor leads). But what if the resistance you want to measure is very small, in the milli or micro-ohm (mΩ or μΩ) range? This can introduce problems because many low-cost multimeters… Read more

Twelfth Grade, Electricity & Electronics Science Projects (18 results)

Explore Our Science Videos