Industry, Innovation and Infrastructure Science Projects (404 results)
|
Select a resource
Filter by
Coding Projects
Sort by
|
If you have an air hockey table, you know that the puck floats on a thin cushion of air when the table is turned on. With little friction, the puck can travel very fast. How much lift force is created by the air? Add small amounts of weight to the puck and see when it no longer floats to measure the lift force. How many air holes (on average) support the puck? How much force is generated by each air hole? Will a puck with a larger surface area, supported by more air holes (on average),…
Read more
Are you good at tossing a Frisbee®? It is great when you throw a perfect, arcing curve, right on target! If you can do that, you have already trained your arm on the aerodynamics of Frisbee flight. Why not treat your brain to some Frisbee science with this project?
Read more
What makes some objects more streamlined than others? Find out which ordinary objects around your house are made to move smoothly through the water in this easy science fair project. Which objects will produce the most drag when pulled through the water?
Read more
Start with 7 drinking straws and 14 paper clips. Use the paper clips to fasten the straws together. Here's how: 1) Clip two paper clips together, narrow end to narrow end. 2) Push the wide ends of each clip into the end of a straw. That's it! Connect four straws to make a square, and three straws to make a triangle. Now test which shape is stronger. Hold the shapes vertically, with an edge or a vertex resting on the tabletop. Have a helper push on the opposite side or vertex. Which shape…
Read more
Note: to do this project you will need the
DIY Mini Drone Kit, available from our partner Home Science Tools®.
An Arduino must be purchased separately. The
Electronics Kit for Arduino, available from our partner Home Science Tools®,
contains the additional parts you will need, including an ultrasonic sensor.
The program in the DIY Mini Drone: Arduino™ Altitude Control project uses a proportional controller to control the drone's altitude. A potentiometer is connected to one…
Read more
Using just a single sheet of paper (8.5 x 11 inches) and up to five paper clips, can you build a bridge that will span 20 cm and support the weight of 100 pennies? The area beneath the span must be free (so that boats can pass beneath it). To test your bridge, place two books 20 cm apart, and set the bridge on the books, spanning the gap. Do not fasten the bridge to the book (nor to any other support). Does your bridge hold as much weight as you expected it would? If your bridge fails…
Read more
What happens if you hold a magnet next to water? You might think that water is not affected by magnetism, but in fact, the water is slightly repelled. Believe it or not, if the magnet is strong enough, you can use this effect to levitate objects that contain water, including insects and even small frogs! In this science project, you will learn about diamagnetism. Materials that are repelled by both poles of a magnet are called diamagnetic. The magnets you will use are not strong enough to float…
Read more
LEDs (light-emitting diodes) are electronic components that convert a portion of the electrical energy flowing through them into light. How does the intensity of the light produced vary with the current flowing through the LED? To find out, you'll build some simple circuits to vary the current flowing an LED. You'll also build a simple light-to-voltage converter circuit to measure LED output.
Read more
Rocket design and operation is a fascinating field and analyzing the flight path provides insight into the rocket's performance. In this project, you will take measurements of the flight path to evaluate how a change in the rocket design or launch procedure impacts the rocket's performance.
Initially, while the bottle rocket expels water (or the rocket expels exhaust), the rocket gets a boost. This push is referred to as thrust and projects the rocket forward. Earth's gravity pulls the rocket…
Read more
Many scientists are currently very excited about CRISPR, as it has the potential to revolutionize gene editing. But what exactly is CRISPR and what does it do? CRISPR is a novel tool in gene editing that allows the modification of genetic DNA at specific target sites in many different organisms. Researchers have high hopes that this technology can, one day, cure genetic diseases, as mutated DNA sequences can easily be corrected. In this project, you will use CRISPR to mutate a DNA sequence…
Read more
|













