Industry, Innovation and Infrastructure, Robotics Science Projects (Page 6)

Keep Your Arduino Robot From Falling Off a Cliff

Science Fair Project Idea

Engineering Design Process

Humans cannot see infrared light, but robots can! At least, they can when they use special infrared light sensors. These sensors can help robots detect nearby objects to avoid collisions and even help them avoid driving off edges. In this project you will build your own Arduino robot that uses infrared sensors to avoid driving off the edge of a table. Read more

X Marks the Spot: Build a Robot to Protect Your Treasures

Science Fair Project Idea

Scientific Method

You have secret treasure that you need to keep safe from thieves. How do you keep guard 24 hours a day without skipping school and the rest of your important activities? You build a guard robot and have it do the hard work! You can build a guard robot using a LEGO® MINDSTORMS® set and the instructions in this project to guide your efforts. And do not worry: your secret is safe with your robot. Read more

PID Controller Tuning for a Drone

Science Fair Project Idea

Engineering Design Process

Note: to do this project you will need the DIY Mini Drone Kit, available from our partner Home Science Tools®. An Arduino must be purchased separately. The Electronics Kit for Arduino, available from our partner Home Science Tools®, contains the additional parts you will need, including an ultrasonic sensor. The program in the DIY Mini Drone: Arduino™ Altitude Control project uses a proportional controller to control the drone's altitude. A potentiometer is connected to one… Read more

Soft Robots with Built-In LEDs

Science Fair Project Idea

Engineering Design Process

Check out the soft robotic gripper and artificial robotic skin projects. These projects show you how to use flexible silicone rubber to make robots or robotic parts. The second project shows you how to connect external LEDs using an Arduino. The LEDs light up when an embedded piece of conductive fabric stretches. What about embedding LEDs in the silicone rubber? You can do this by embedding the LEDs between layers of silicone (Figure 1). The trick is to solder flexible stranded wires to the… Read more

Go, Gadget, Go! Building Robots with LEGO® Mindstorms®

Science Fair Project Idea

Scientific Method

In the mid-20th century, people thought of robots as futuristic tools. But in the 21st century, robots are not a figment of our imaginations, but are a part of our reality. Robots even perform tasks that humans can't do. In this engineering science fair project, you will use LEGO Mindstorms to build a robot that is fast, lightweight, and stable. Who knows? You might end up building a robot that does housework or even your homework! Read more

Eco-Friendly Squishy Robots

Science Fair Project Idea

Scientific Method

In our introductory VoxCAD project, you were challenged to use the VoxCAD software to design the fastest possible robot using different materials. However, we did not ask you to think about one big thing — efficiency. It is great to design a robot that is very fast, but what if it also consumes a lot of energy? Engineers must consider this when designing robots in the real world — robots that use more energy to move will drain their batteries faster, which can be a problem. This is… Read more

Should My Robot be More or Less Squishy?

Science Fair Project Idea

Scientific Method

In our introductory VoxCAD project, we provided a template with four materials: two active materials that expand and contract in the physics sandbox mode, and two passive materials — one hard and one soft. The project mentioned material properties, but it did not go into much detail — you just used the default settings from the template. Changing the material properties can drastically change how your robots behave. Engineers must take material properties into account when designing… Read more

Industry, Innovation and Infrastructure, Robotics Science Projects (57 results)

Explore Our Science Videos