Industry, Innovation and Infrastructure, Sixth Grade Science Projects (Page 20)

The Point of a Parabola: Focusing Signals for a Better Wireless Network

Science Fair Project Idea

Scientific Method

Have you ever been annoyed by poor Wi-Fi reception for your phone, tablet, or laptop? Do you wish there was something you could do about it? In this project you will learn how to build a parabolic reflector that you can attach to the antenna of a regular wireless router to help boost its signal. Read more

The Strength of an Electromagnet

Science Fair Project Idea

Scientific Method

You may be familiar with permanent magnets—the kind that hang on a refrigerator. But did you know that other magnets, called electromagnets, can be turned on and off? When turned on, electromagnets act just like permanent magnets, but if you turn them off, their magnetic properties disappear. Electromagnets are an important part of many electronic devices, like motors, loudspeakers, and hard drives. You can create an electromagnet with a simple coil of wire and a battery. In this project,… Read more

The Surprising Strength of Eggshells

Science Fair Project Idea

Scientific Method

Have you ever seen an arch structure in a building, such as over a doorway or surrounding large windows? Arches have been used for structural engineering since ancient times. This experiment tests the strength of a naturally occurring arch shape: the shell of an egg. How much mass do you think an eggshell can support? Read more

The True Cost of a Bike Rack: Aerodynamics and Fuel Economy

Science Fair Project Idea

Scientific Method

Race car drivers need every advantage they can get to give them the competitive edge in a race. In addition to human factors, like driving skill and reaction time, their cars must overcome physical forces, like air resistance, to maintain their high speeds. While this science project will not have you driving around a race track at 200 miles per hour, you will get to test how increased air resistance affects a real car's fuel economy. You will do this by measuring and comparing the gas mileage… Read more

The Turn of the Screw

Science Fair Project Idea

Scientific Method

How much force is required to advance a lag bolt (large wood screw with a hex-shaped head) into a piece of wood? You can measure the force by using a spring scale attached to the handle of ratchet. Pull on the spring scale until the bolt starts to turn, and note the required force from the spring scale. There are many potential experiments you could try. Think about answering the following questions: How does the force change as the bolt advances deeper into the wood? Why? How does the… Read more

The 'Ultimate' Science Fair Project: Frisbee Aerodynamics

Science Fair Project Idea

Scientific Method

Are you good at tossing a Frisbee®? It is great when you throw a perfect, arcing curve, right on target! If you can do that, you have already trained your arm on the aerodynamics of Frisbee flight. Why not treat your brain to some Frisbee science with this project? Read more

The Viscosity of Motor Oil

Science Fair Project Idea

Scientific Method

The insides of a car engine get very hot when the engine is running. Motor oil lubricates the moving parts, to keep the engine operating smoothly. What happens to motor oil as the engine temperature goes up? Read more

The Wright Stuff: Using Kites to Study Aerodynamics

Science Fair Project Idea

Scientific Method

The Wright brothers used kites extensively to test their design ideas in the years leading up to their first successful airplane flight. With this science project, you'll learn about kite aerodynamics, and then come up with your own hypothesis about building or flying a kite. You can test your hypothesis two ways: with an online kite simulation program from NASA, and outdoors with the real thing! A great feature of this science project is that it has many possible variations, so you can decide… Read more

Try the Mythbusters' "Phone Book Friction" Experiment at Home

Science Fair Project Idea

Scientific Method

Have you ever heard that two phone books with the pages interleaved are impossible to pull apart? This might seem crazy, right? It is not that hard to slide a sheet of paper off the top of a stack of paper. How much friction can there really be between sheets of paper? In this experiment, you will use pads of sticky notes instead of phone books. How much weight can they support when you interleave the pages? Do you think you will be able to pull them apart by hand? The results might surprise… Read more

Understand Shock Levels and Packaging Principles

Science Fair Project Idea

Scientific Method

When you open up your presents on your birthday, you probably don't spend a lot of time admiring the wrapping—you'd much rather see what's inside. It can be the same way with the packaging that products come in, but packaging is important for protecting the things we buy as they make their way from the factory to our homes. How much shock force is produced when a box gets dropped accidentally? What kinds of materials work best to protect products from damage? This project can show you… Read more

Industry, Innovation and Infrastructure, Sixth Grade Science Projects (223 results)

Explore Our Science Videos