High School, Electricity & Electronics Projects, Lessons, Activities (Page 6)

How Does LED Brightness Vary with Current?

Science Fair Project Idea

Scientific Method

LEDs (light-emitting diodes) are electronic components that convert a portion of the electrical energy flowing through them into light. How does the intensity of the light produced vary with the current flowing through the LED? To find out, you'll build some simple circuits to vary the current flowing an LED. You'll also build a simple light-to-voltage converter circuit to measure LED output. Read more

How Far Can Sparks Jump?

Science Fair Project Idea

Scientific Method

Piezoelectric barbecue fire starters work by creating a spark that ignites the volatile lighter fluid, which then starts the charcoal burning. They are low current, high voltage devices. How high does the voltage have to get to make a spark in air? This project shows you a way to find out by with an inexpensive experimental setup to measure the distance that the spark can travel between two spherical electrodes. Read more

LED Traffic Glove: Build a Safety Device to Direct Traffic

Science Fair Project Idea

Scientific Method

From traffic safety lights to neon signs, lights have a way of getting peoples' attention. So it makes sense that if a person wants to get attention, wearing clothing with built-in lights might help. These types of clothing, called electronic textiles (e-textiles for short), or wearable electronics, already exist. Instead of using hard surfaces for circuits (like inside your computer or cell phone), e-textiles weave electrical parts like batteries, wires, and lights directly into wearable… Read more

Linear vs. Logarithmic Changes: What Works Best for Human Senses?

Science Fair Project Idea

Scientific Method

If you want to get your friend's attention at a crowded sporting event with lots of people cheering, you need to shout. If you're trying to do the same thing in a quiet library, a whisper works. The detection limit for each of our senses depends on the amount of "background" stimulation that is already present. This project uses an LED control circuit to investigate detection of changes in light levels. Read more

Motorized Arduino Cable-Driven Spacecraft Motion Simulator

Science Fair Project Idea

Engineering Design Process

How do you practice docking a spacecraft with the International Space Station or landing on Mars? With a room-sized cable-driven spacecraft motion simulator! In this project, you will build your own miniature, motorized version of a full-sized motion simulator scientists are developing that can move model spacecraft around in a controlled manner. Read more

Recording on a Wire

Science Fair Project Idea

Scientific Method

Today magnetic recording is used in audio and video cassette recorders, and computer disk drives. Did you know that you can also use an electromagnet to record and play back from a steel wire? In fact, this is how magnetic recording got started. This project shows you how to build a simple wire recorder. Read more

Smart Medicine Cabinet: Build a Sensor That Reminds Patients When to Take Medication

Science Fair Project Idea

Scientific Method

Have you ever had to take prescription medicine to get over an illness? To get better, it is important to take the medication in the proper manner and at the proper time. Wouldn't it be cool if there were a tool or piece of automated equipment that held your medicine and reminded you to take it? A tool that would know when you picked up the bottle and took your medicine? Building a smart medicine cabinet is what this science project is all about! Read more

Testing a Parabolic Reflector with Light from an LED

Science Fair Project Idea

Scientific Method

You can see examples of parabolic reflectors in flashlights, car headlights, satellite TV antennas, and even on the sidelines at football games. How do these "dish" antennas work to gather signals? What is the best position for placing the detector for these antennas? In this project, you can use an LED and a simple photodetector to find out for yourself. Read more

Two-Point and Four-Point Methods for Measuring Small Resistances

Science Fair Project Idea

Scientific Method

Measuring the value of a resistor with a multimeter is pretty simple. You set the multimeter to measure resistance, connect the two leads to the resistor (possibly using some handy alligator clips), and read the resistance value. This is called a two-point measurement (one probe on each of the two resistor leads). But what if the resistance you want to measure is very small, in the milli or micro-ohm (mΩ or μΩ) range? This can introduce problems because many low-cost multimeters… Read more

Water Drops and Sparks! Experimenting with a Kelvin Electrostatic Generator

Science Fair Project Idea

Scientific Method

Water is an interesting thing. We drink it, swim in it, and wash ourselves with it. We can get energy from water by damming it and sending it through a turbine. But did you know that we can use the natural electrical charges present in water and a Kelvin electrostatic generator to create sparks? You can even use a Kelvin electrostatic generator to temporarily light a bulb! Now that is one bright idea! Read more

High School, Electricity & Electronics Projects, Lessons, Activities (71 results)

Explore Our Science Videos