High School Projects, Lessons, Activities (851 results)
|
Select a resource
Sort by
|
Measuring the value of a resistor with a multimeter is pretty simple. You set the multimeter to measure resistance, connect the two leads to the resistor (possibly using some handy alligator clips), and read the resistance value. This is called a two-point measurement (one probe on each of the two resistor leads). But what if the resistance you want to measure is very small, in the milli or micro-ohm (mΩ or μΩ) range? This can introduce problems because many low-cost multimeters…
Read more
Every time you go to the doctor's office, the nurse measures your blood pressure. But why does he or she do this? What does your blood pressure tell your doctor about your health? And what exactly is blood pressure? In this life science project, you will learn about blood pressure and what causes it. You will even learn how to take blood pressure readings. Once you learn this skill, you will test a population of children and determine if blood pressure depends upon a child's age.
Read more
Here's a project that involves a different kind of sandbox than the ones you usually think of. This one has a moving wall inside, acting like a piston, to compress the sand. You can make layers using two different colors of sand, and then see what happens when you compress the layers with the piston. If you're handy with woodworking tools, this is a good project to give you a feel for the effects of geological forces that deform the Earth's crust.
Read more
This project shows you how to build a simple model system to simulate underground water flow. Underground water flow is important for understanding replenishment of underground aquifers, migration of underground contaminant plumes, and cave formation. With your model system, you can simulate various underground conditions, and test your predictions about the effects they have on water flow.
Read more
An electric current produces a magnetic field. You can take advantage of this fact to make a simple apparatus to test the electrical conductivity of various materials, including both solids and liquids. The detector consists of a coil of wire, with a magnetic compass inside it. You connect one end of the coil to a D-cell battery. The other end of the coil is connected to whatever material you are testing, and the material, in turn, is connected to the other end of the D-cell. In other…
Read more
Here's a cool project that shows you how to use images from an orbiting observatory to measure how fast the Sun rotates.
Read more
Lesson Plan
Grade: 9th-12th
1 review
Teach your students about the engineering design process with this fun lesson plan. They will design and build two "volleyball machines" that launch a ping pong ball back and forth over a net. While the
2019 Engineering Challenge is over, your students can still try this project and compare their scores to top scores from around the world! Teachers, note that elementary school and middle school versions of this lesson plan are also available.
Looking for this year's challenge? Check out…
Read more
NGSS Performance Expectations:
STEM Activity
13 reviews
Water is one of the most important resources for life. Here on Earth, we often take it for granted — we can easily get a glass of water from the tap whenever we’re thirsty. But imagine being an astronaut orbiting hundreds of miles above our planet. In space, every drop of water is precious, and there’s no tap to turn on. Transporting water from Earth to the ISS is incredibly expensive and impractical due to the limited cargo space and the high cost of launching supplies. To address this,…
Read more
Lesson Plan
Grade: 9th-12th
Building on an introduction to statics, dynamics free-body diagrams, combustion and thermodynamics provided by the associated lesson, students design, construct and test their own rocket engines using sugar and potassium nitrate—an opportunity to apply their knowledge of stoichiometry. This activity helps students understand that the energy required to launch a rocket comes from the chemical energy stored in the rocket fuel. The performance of each engine is tested…
Read more
NGSS Performance Expectations:
STEM Activity
7 reviews
Wearables are found all over the biomedical world: heart rate monitors, EKG patches, braces, etc. In this project, you will make your own wearable air quality sensor that notifies you of high-risk air. You can attach the sensor patch on any existing clothing or even make a standalone patch that you can wear as a necklace or a bracelet.
Read more
|












