Kindergarten, Aerodynamics & Hydrodynamics Science Experiments (76 results)
|
Select a resource
Sort by
|
The Wright brothers used kites extensively to test their design ideas in the years leading up to their first successful airplane flight. With this science project, you'll learn about kite aerodynamics, and then come up with your own hypothesis about building or flying a kite. You can test your hypothesis two ways: with an online kite simulation program from NASA, and outdoors with the real thing! A great feature of this science project is that it has many possible variations, so you can decide…
Read more
You have probably made plenty of regular paper airplanes simply by folding a piece of printer or notebook paper. Have you ever tried making a "high performance" paper glider? These gliders use a different construction technique that involves cutting multiple shapes out of thicker, stiffer paper and gluing them together (this process is called lamination). There are many resources online that can get you started with the art of making high performance paper gliders. See the references in the…
Read more
Try different wind turbine/propeller (chord length, pitch) designs by making models from balsa wood. Connect the spinning axle to a DC motor and measure the voltage produced across a resistor to measure power output. Use fan as wind source. (Judge, 2004)
Read more
Winglets are the short vertical "fins" at the wingtips of some airplanes. Have you ever wondered why they are there? If you have access to a wind tunnel, you can build model airfoils with and without winglets and see for yourself. If you're really ambitious, you can also build your own wind tunnel.
Read more
Does the force of drag have an effect on the distance the puck will travel? Think of a way to launch the puck with a reproducible force, and examine the effect of launching the puck in different orientations on the distance it travels. For more information on the physics, see Haché, 2002.
Read more
If you have an air hockey table, you know that the puck floats on a thin cushion of air when the table is turned on. With little friction, the puck can travel very fast. How much lift force is created by the air? Add small amounts of weight to the puck and see when it no longer floats to measure the lift force. How many air holes (on average) support the puck? How much force is generated by each air hole? Will a puck with a larger surface area, supported by more air holes (on average),…
Read more
This science project presents an interesting puzzle. A disk of wood will float face-up; that is, with its circular cross-section parallel to the surface of the water. A long log of wood, however, floats on its side with the circular cross-section perpendicular to the surface of the water. If you think about it, disks and logs are both cylinders. Is there some intermediate length of cylinder that floats with the circular cross-section at a tilted angle? Try this experiment to find out!
Read more
STEM Activity
67 reviews
How do you make a drone fly up and down? In this activity, you will build a simple circuit to control the altitude of a popsicle stick drone.
See this page for a complete list of our mini drone projects. You may wish to do the projects in order.
Read more
STEM Activity
27 reviews
How do you steer a drone using a controller with a joystick? Find out in this activity as you program an Arduino to interface with an analog joystick, similar to those found in most video game controllers. You can use the joystick to make a mini popsicle stick drone tilt side to side or move up and down.
See this page for a complete list of our mini drone projects. You may wish to do the projects in order.
Read more
Note: to do this project you will need the
DIY Mini Drone Kit, available from our partner Home Science Tools®.
An Arduino must be purchased separately. The
Electronics Kit for Arduino, available from our partner Home Science Tools®,
contains the additional parts you will need, including an ultrasonic sensor.
The program in the DIY Mini Drone: Arduino™ Altitude Control project uses a proportional controller to control the drone's altitude. A potentiometer is connected to one…
Read more
|












