Middle School, Electricity & Electronics Science Experiments (Page 7)

Build an Arduino Strobe Light for the Stroboscopic Effect

Science Fair Project Idea

Engineering Design Process

The Science Buddies project Build a Levitating Water Fountain with the Stroboscopic Effect shows you how to illuminate a dripping stream of water with a strobe light to make it look like the drops are hovering in mid-air. If you have not already, read the background section of that project and watch the following two videos. Make sure you understand frequency, period, and duty cycle before you proceed with this project. The project has you use a strobe light app on your phone. The advantage… Read more

Electric Paint: Light Up Your Painting

Science Fair Project Idea

Scientific Method

Electric paint is a fun way to include a circuit with lights in an art project, but it presents a challenge not found in traditional electronic circuits. What happens if you change the length or width of your strokes of paint, such as by painting longer, curvier lines or using a thicker brush? Could this affect the electrical properties of your circuit? Try this project to find out! Read more

Electric Play Dough Project 2: Rig Your Creations With Lots of Lights!

Science Fair Project Idea

Scientific Method

Have you tried our first electric play dough project, and now you are looking for more to do? Do you want to learn more about circuits and add even more lights? Check out this project for part 2 of our play dough circuits series! Read more

Find the Best Place to Put a Solar Panel

Science Fair Project Idea

Scientific Method

Imagine trying to put a solar panel on your roof or outside your home to generate clean, renewable energy. Where would you put it so it generates as much power as possible throughout the day? What direction should it face? Is there a way to take measurements to find the best location before you install the panel? In this project, you will use a tiny programmable device called a micro:bit to record light data and find the best place to put your panel. Read more

How Much Current Does It Take To Blow Up An LED?

Science Fair Project Idea

Scientific Method

Have you ever accidentally burned out an LED while building a circuit? What about doing it on purpose—for science, of course! In this science project, you will intentionally send too much current through LEDs to see if they will burn out or even explode! How much current does it take to destroy an LED? How does this compare to the LED's rated current value? Try this project and find out! Check out this page for more LED science projects. Read more

LED Dance Glove: Get the Party Started with Your Own Interactive Light Show

Science Fair Project Idea

Scientific Method

Have you ever seen clothing with built-in lights? This might sound like something out of a science-fiction movie, but electronic textiles (>e-textiles for short, also called wearable electronics or sewable circuits) really exist. Instead of using hard surfaces for circuits (like what goes inside your computer or cell phone), e-textiles weave electrical parts like batteries, wires, and lights directly into clothing that you can wear to make the clothing do fun, interesting things like light… Read more

Motorized Arduino Cable-Driven Spacecraft Motion Simulator

Science Fair Project Idea

Engineering Design Process

How do you practice docking a spacecraft with the International Space Station or landing on Mars? With a room-sized cable-driven spacecraft motion simulator! In this project, you will build your own miniature, motorized version of a full-sized motion simulator scientists are developing that can move model spacecraft around in a controlled manner. Read more

Program a Sound Level Meter to Help Protect Your Hearing

Science Fair Project Idea

Engineering Design Process

Have you ever said, "That hurt my ears!" when someone yelled loudly right next to you? Do you cover your ears when a fire truck drives by with the sirens blaring? It is good to protect your ears—even sounds that do not "hurt" can cause hearing damage if you are exposed to them for too long. In this project, you will program a device that alerts you when sounds have exceeded safe levels long enough to cause hearing damage. Read more

Abracadabra! Levitating with Eddy Currents!

Science Fair Project Idea

Scientific Method

Did you know that not all trains run on tracks? Some of the world's fastest trains are magnetic levitation trains (maglev). This means that the carriage of the train is suspended over the rails with no support, but only with magnetic fields! There is a physical explanation for magnetic levitation, and if you would like to learn more about magnetism and current, this is a science fair project that you must try! Read more

Make a Glitter Surprise Package

Science Fair Project Idea

Engineering Design Process

Have you ever seen a video of a glitter prank package? They usually show an unsuspecting person opening a package or a gift, only to be sprayed by a shower of glitter. Former NASA engineer Mark Rober got tired of thieves stealing packages off his porch, so he decided to build an elaborate decoy glitter package*, as he shows in this video. Mark's device involves a lot of custom software, electronics, and 3D printing, so might seem a little intimidating if you are new to engineering. The summary… Read more

Middle School, Electricity & Electronics Science Experiments (112 results)

Explore Our Science Videos