Seventh Grade, Electricity & Electronics Science Projects (45 results)

Piezoelectric barbecue fire starters work by creating a spark that ignites the volatile lighter fluid, which then starts the charcoal burning. They are low current, high voltage devices. How high does the voltage have to get to make a spark in air? This project shows you a way to find out by with an inexpensive experimental setup to measure the distance that the spark can travel between two spherical electrodes. Read more

Maybe somewhere in your home there's a long hallway or a stairway with a light that you can turn on from either end. It's a nice convenience, but did you ever wonder how it's wired up to work that way? The goal of this project is to build a similar circuit with switches, flashlight batteries and a flashlight bulb (obviously, household circuits are not safe to experiment with). You'll need to understand the difference between connections made in series and connections made in parallel in an… Read more

Here's a puzzle you may have heard before which you can build as a simple electric circuit. First, the puzzle: a farmer is traveling to market with his cat, a chicken and some corn. He has to cross a river, and the only way to cross is in a small boat which can hold the farmer and just one of the three items he has with him. The problem is, he has to be very careful about what he chooses to leave behind at any time. If the cat and chicken are left alone, the cat will eat the chicken. If… Read more

You probably know that you can use iron filings to reveal the magnetic field produced by a strong magnet. If you sandwich the iron filings between pieces of waxed paper, you can make a permanent record of your magnetic experiments (Gardner, 2004, 66). Cover the wax paper sandwich with a layer of brown paper (from a roll, or cut open a paper shopping bag), and then (with an adult's help) use a hot, dry iron to seal the waxed paper together. You will have to experiment a little with your iron… Read more

Have you ever seen night lights that automatically turn on when it gets dark? What about art projects, like paintings or sculptures, with embedded lights? This project will let you combine the two, by adding lights to an art project of your choice. You can make the lights automatically turn on when it gets dark using a Raspberry Pi. Check out the video to see what this simple, but fun, project looks like. IMPORTANT: The instructions for this project were originally written using Scratch 2 on a… Read more