Electricity & Electronics Science Projects (94 results)

If you have ever built an electronic circuit with a soldering iron, you know that the component leads get hot. How much of that heat gets into the device you're soldering? This project shows you how you can use a silicon diode as a temperature sensor to find out. Read more

You've seen that a magnet's attractive force can cause a small object (like a paper clip) to "jump" to the magnet. So a magnetic field can act through the air, but what about other materials? Here's an experiment you can do to find out. You'll need a strong bar magnet, a stack of books, a paper clip, some thread and tape. Place the bar magnet underneath the top book in your stack, so that it sticks out. Tie a piece of thread (as long as the stack of books is high) to a paper clip. You… Read more

An electric current produces a magnetic field. You can take advantage of this fact to make a simple apparatus to test the electrical conductivity of various materials, including both solids and liquids. The detector consists of a coil of wire, with a magnetic compass inside it. You connect one end of the coil to a D-cell battery. The other end of the coil is connected to whatever material you are testing, and the material, in turn, is connected to the other end of the D-cell. In other… Read more

You probably know that you can use iron filings to reveal the magnetic field produced by a strong magnet. If you sandwich the iron filings between pieces of waxed paper, you can make a permanent record of your magnetic experiments (Gardner, 2004, 66). Cover the wax paper sandwich with a layer of brown paper (from a roll, or cut open a paper shopping bag), and then (with an adult's help) use a hot, dry iron to seal the waxed paper together. You will have to experiment a little with your iron… Read more