Industry, Innovation and Infrastructure, High School Science Projects (Page 13)

How Do You Know Where You Are Without GPS? Dead Reckoning and Inertial Navigation

Science Fair Project Idea

Engineering Design Process

Put a meter stick on the ground. Starting at one end of the stick, close your eyes and try to walk exactly one meter. Open your eyes. How close were you? Now try it again with five, ten, or twenty meters. Does it get harder as the distance gets bigger? Without an outside reference from your visual system, it's quite difficult to know exactly how far you've gone! Electronic navigation systems face the same problem. Without an external reference like the global positioning system (GPS), it's very… Read more

How Does LED Brightness Vary with Current?

Science Fair Project Idea

Scientific Method

LEDs (light-emitting diodes) are electronic components that convert a portion of the electrical energy flowing through them into light. How does the intensity of the light produced vary with the current flowing through the LED? To find out, you'll build some simple circuits to vary the current flowing an LED. You'll also build a simple light-to-voltage converter circuit to measure LED output. Read more

Applying Hooke's Law: Make Your Own Spring Scale

Science Fair Project Idea

Scientific Method

Hooke's law says that the opposing force of a spring is directly proportional to the amount by which the spring is stretched. How accurately Hooke's law describe the behavior of real springs? Can springs be used to make accurate scales for weighing objects? Spring into action and find out for yourself with this project. Read more

Genetically Engineer Yeast to be Fluorescent

Science Fair Project Idea

Scientific Method

Can you imagine a glowing loaf of bread? You might not be able to make the whole loaf glow, but you can get baker's yeast to fluoresce! The way to do this is to modify the genetic information of the yeast organism. The technology that is used to do this is called genetic engineering. With genetic engineering, you can insert a fluorescent protein gene from a jellyfish into yeast cells, so they start glowing under blue light! Do this project to see for yourself! Read more

Space Radiation Protection

Science Fair Project Idea

Engineering Design Process

The radiation sources recommended in this experiment are low-dose radioactive sources and do not require a license to purchase; they are safe to work with as long as these common-sense safety tips are followed: Wear disposable gloves when handling any radioactive source. Never rub your eyes or mouth while you are handling the radioactive source. NEVER swallow any radioactive source and use protective glasses when bringing a source within a few inches of… Read more

PID Controller Tuning for a Drone

Science Fair Project Idea

Engineering Design Process

Note: to do this project you will need the DIY Mini Drone Kit, available from our partner Home Science Tools®. An Arduino must be purchased separately. The Electronics Kit for Arduino, available from our partner Home Science Tools®, contains the additional parts you will need, including an ultrasonic sensor. The program in the DIY Mini Drone: Arduino™ Altitude Control project uses a proportional controller to control the drone's altitude. A potentiometer is connected to one… Read more

Build Your Own Dobsonian Telescope

Science Fair Project Idea

Scientific Method

For an advanced science fair project, you can build your own telescope and learn how to use it to make observations of the night sky. Can you make your own observations to determine the orbital period of Jupiter's major moons? The Dobsonian telescope, first built and popularized by astronomer John Dobson, is considered to be the best bang-for-your-buck if you want to build a good amateur telescope. The smaller the telescope's aperture the less expensive to build, but also the less… Read more

Build an Arduino Robot

Science Fair Project Idea

Engineering Design Process

The Science Buddies Bluebot Kit contains parts to build four different robots: A motion-activated robot that uses a passive infrared (PIR) sensor A light-tracking robot that uses photoresistors A line-following robot that uses infrared emitter-detectors An obstacle-avoiding robot that uses bump sensors However, in each project, the sensors are hard-wired to control the robot's motors. This allows the robot to steer left and right based on input from two sensors, but it does not allow the… Read more

Testing a Parabolic Reflector with Light from an LED

Science Fair Project Idea

Scientific Method

You can see examples of parabolic reflectors in flashlights, car headlights, satellite TV antennas, and even on the sidelines at football games. How do these "dish" antennas work to gather signals? What is the best position for placing the detector for these antennas? In this project, you can use an LED and a simple photodetector to find out for yourself. Read more

Build Your Own RC Drone

Science Fair Project Idea

Engineering Design Process

Important Safety Information About Drones Drones are a lot of fun to fly, but they can be dangerous if not used responsibly. Local, state, and federal regulations about recreational use of drones may vary based on your location or change over time. For example, you may be required to register your drone, or be prohibited from flying it in certain locations (like near an airport or over a crowd of people). Before you do a science project with a drone, ask an adult to help you find out… Read more

Industry, Innovation and Infrastructure, High School Science Projects (195 results)

Explore Our Science Videos