Industry, Innovation and Infrastructure, High School Science Projects (195 results)
|
Select a resource
Filter by
Coding Projects
Sort by
|
Research the famous collapse of the Tacoma Narrows suspension bridge.
What lessons were learned about the potentially damaging effects of wind on bridges? What structures stabilize a bridge against wind forces? Build models and use a wind tunnel to test your hypothesis.
Read more
Hold onto your hats! In this science fair project, you will make a device that sends a film canister across the room with a small chemical explosion. The energy for the explosion is derived from the combustion of ethanol. You will determine the launch velocity of the canister, as well as devise ways to study changes in gas pressure and volume due to the explosion. This science fair project is sure to take your breath away!
Read more
Noise is everywhere. From the clanking of a cowbell to the din of the lunchroom, we are surrounded by noise. Sometimes there's no way to get away from it, but there is a way to deal with it—constrained-layer damping. By simply creating a layered sandwich of somewhat flexible materials, what was once a noisy cowbell can become a "noise blanket." This science fair project shows you how to transform a noisy piece of metal into a sound-muffling constrained-layer damper. You'll record the…
Read more
Bristlebots are tiny little robots with no "brain." They are powered by vibrations and move around randomly. Even if there is no brain, can you still influence how they move by changing their design? Find out in this fun robotics project!
Read more
Cooking, washing, and many industrial processes involve the mixing of liquids. How liquids behave when they are mixed is dependent on many factors. Sometimes, the mixing behavior of liquids can be quite surprising! For example, when you mix 50 mL of one liquid with 50 mL of another liquid, you might not end up with a 100 mL mixture! In this science project, you will explore this phenomenon, which we call the "excess volume" of mixtures. How do you think your mixing volumes will…
Read more
Electric paint is a fun way to include a circuit with lights in an art project, but it presents a challenge not found in traditional electronic circuits. What happens if you change the length or width of your strokes of paint, such as by painting longer, curvier lines or using a thicker brush? Could this affect the electrical properties of your circuit? Try this project to find out!
Read more
What happens if you hold a magnet next to water? You might think that water is not affected by magnetism, but in fact, the water is slightly repelled. Believe it or not, if the magnet is strong enough, you can use this effect to levitate objects that contain water, including insects and even small frogs! In this science project, you will learn about diamagnetism. Materials that are repelled by both poles of a magnet are called diamagnetic. The magnets you will use are not strong enough to float…
Read more
Are you fascinated by radioactivity and the emission of particles caused by the disintegration of an atom? This science project enables you to observe safely a spectacular display of radioactive decay. Following the instructions in the Procedure, you will be able to isolate a safe radioactive source and build a cloud chamber to watch the radioactive decay. Then you will use your cloud chamber to discover if a plastic lid can shield you from this type of radioactive decay particles.
Read more
The radiation sources recommended in this experiment are low-dose radioactive sources and do not require a license to purchase; they are safe to work with as long as these common-sense safety tips are followed:
Wear disposable gloves when handling any radioactive source.
Never rub your eyes or mouth while you are handling the radioactive source.
NEVER swallow any radioactive source and use protective glasses when bringing a source within a few inches of…
Read more
Helicopters are fascinating to watch. The spinning rotor blades on top of the helicopter generate lift, allowing it to take off vertically. They can land vertically, too, allowing them to set down in small spaces, such as hospital helipads or on a ship at sea. In this aerodynamics science fair project, you will fly a remote-controlled helicopter and measure how the rate of the rotor's rotation changes as the helicopter hovers and flies up or down.
Read more
|














