Fifth Grade Mechanical Engineering Science Projects (9 results)

If you're interested in object motion and enjoy building things or taking mechanical things apart to see how they work, then it sounds like you'd be interested in mechanical engineering. Check out one of the mechanical engineering project ideas below and you could find exactly what you're looking for.

Search Refinements
Go
Cost
Time
Material Availability
Science Fair Project Idea
Try your hand at this engineering challenge. Can you build a "launcher" device to launch a ball as far as possible and a "receiver" to catch it? Building a receiver provides an extra twist to a traditional catapult project. Add to the challenge by using a limited set of materials to build your machine and calculate a score based on your throw distance and materials used. Read more
ApMech_p052
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Very Low (under $20)
Safety No issues
Science Fair Project Idea
If you were in a raiding army in the Middle Ages, a catapult would come in mighty handy for taking down castle walls. But only if you could aim it reliably! With this science project, you will try your hand at catapult technology. Using a rubber-band-powered catapult you will send ping pong balls flying through the air. The catapult's design makes it easy to measure and repeat how hard the ball is launched and its direction, so you can find the right catapult settings to hit the target reliably. Read more
ApMech_p008
+ More Details
- Less Details
Time Required Very Short (≤ 1 day)
Prerequisites None
Material Availability A kit is available from our partner . See the Materials tab for details.
Cost Low ($20 - $50)
Safety Do not aim the catapult at breakable objects or people; minor injury possible.
Science Fair Project Idea
Why do so many people use cell phone cases? Do cell phones really need the extra protection, or is it just because cases look fancy? In this engineering science project, you will test the durability of calculators instead of cell phones, find out if cases increase the durability of the device, and build some of your own cases that do! Read more
ApMech_p050
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available. See the Materials and Equipment list for details.
Cost Low ($20 - $50)
Safety No issues
Science Fair Project Idea
Look around you. What types of objects do you see in the room? Furniture, lights, a computer, a fan, pencils, books, etc.? Where did they come from? Odds are you did not build them yourself. You or your parents probably bought them at a store. Before that, they were built in a factory somewhere. And even before that, they were probably designed by engineers. You might think of engineers when you think of complex machines like rockets or huge structures like bridges, but engineers also design… Read more
ApMech_p053
+ More Details
- Less Details
Time Required Very Short (≤ 1 day)
Science Fair Project Idea
Music boxes, bicycles, and clocks all have one thing in common: GEARS! You might say that gears make the world turn, since they are in so many mechanical instruments. How do they work and how do you know which gears to use? Find out in this simple experiment. Read more
ApMech_p016
+ More Details
- Less Details
Time Required Very Short (≤ 1 day)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety No issues
Science Fair Project Idea
Amaze your friends and family by moving water with just a few turns of your wrist! Nope, it's not a magic trick. It's simply an Archimedes screw. In this science project, you will build a very simple pump, called an Archimedes screw, to transfer water from a low-lying location to a higher location. Read more
ApMech_p039
+ More Details
- Less Details
Time Required Very Short (≤ 1 day)
Prerequisites None
Material Availability Readily available
Cost Average ($40 - $80)
Safety Minor injury possible. Be careful when cutting the tubing.
Science Fair Project Idea
When you open up your presents on your birthday, you probably don't spend a lot of time admiring the wrapping—you'd much rather see what's inside. It can be the same way with the packaging that products come in, but packaging is important for protecting the things we buy as they make their way from the factory to our homes. How much shock force is produced when a box gets dropped accidentally? What kinds of materials work best to protect products from damage? This project can show you… Read more
ApMech_p009
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Specialty item
Cost Low ($20 - $50)
Safety No issues
Science Fair Project Idea
Can you build a volleyball machine? It will need one part to launch a ping pong ball over a net and another to return the ball. How many back-and-forth volleys can you get before the ball touches the ground? While the 2019 Fluor Engineering Challenge is over, you can still try this fun project out yourself. Follow the rules and compare your score to top scores from around the world! Looking for this year's challenge? Check out our main Fluor Engineering Challenge page for all the latest… Read more
ApMech_p054
+ More Details
- Less Details
Time Required Short (2-5 days)
Prerequisites None
Material Availability Readily available
Cost Very Low (under $20)
Safety No issues
Science Fair Project Idea
How much force does it take to drive a nail through different types of wood? In this project you'll build a simple test apparatus to swing a hammer reproducibly so you can find out. Read more
ApMech_p024
+ More Details
- Less Details
Time Required Average (6-10 days)
Prerequisites None
Material Availability Readily available
Cost Low ($20 - $50)
Safety Adult supervision and assistance recommended (power tools used to assemble test apparatus).
1