Industry, Innovation and Infrastructure, Ninth Grade Science Projects (Page 16)

The 'Ultimate' Science Fair Project: Frisbee Aerodynamics

Science Fair Project Idea

Scientific Method

Are you good at tossing a Frisbee®? It is great when you throw a perfect, arcing curve, right on target! If you can do that, you have already trained your arm on the aerodynamics of Frisbee flight. Why not treat your brain to some Frisbee science with this project? Read more

Try the Mythbusters' "Phone Book Friction" Experiment at Home

Science Fair Project Idea

Scientific Method

Have you ever heard that two phone books with the pages interleaved are impossible to pull apart? This might seem crazy, right? It is not that hard to slide a sheet of paper off the top of a stack of paper. How much friction can there really be between sheets of paper? In this experiment, you will use pads of sticky notes instead of phone books. How much weight can they support when you interleave the pages? Do you think you will be able to pull them apart by hand? The results might surprise… Read more

Two-Point and Four-Point Methods for Measuring Small Resistances

Science Fair Project Idea

Scientific Method

Measuring the value of a resistor with a multimeter is pretty simple. You set the multimeter to measure resistance, connect the two leads to the resistor (possibly using some handy alligator clips), and read the resistance value. This is called a two-point measurement (one probe on each of the two resistor leads). But what if the resistance you want to measure is very small, in the milli or micro-ohm (mΩ or μΩ) range? This can introduce problems because many low-cost multimeters… Read more

Under Pressure: Sand Under Lateral Compression

Science Fair Project Idea

Scientific Method

Here's a project that involves a different kind of sandbox than the ones you usually think of. This one has a moving wall inside, acting like a piston, to compress the sand. You can make layers using two different colors of sand, and then see what happens when you compress the layers with the piston. If you're handy with woodworking tools, this is a good project to give you a feel for the effects of geological forces that deform the Earth's crust. Read more

Use a Calorimeter to Measure the Heat Capacity of Water

Science Fair Project Idea

Scientific Method

Along with its many other interesting properties, water has the ability to absorb a lot of heat energy, while only experiencing a relatively small change in temperature. One way this property affects us directly is that our bodies don't change temperature rapidly on hot or cold days, since we are made up of mostly water. In this chemistry-with-an-electronics-flair science fair project, you will determine how the temperature of a small volume of water changes as you add precise amounts of heat… Read more

Use an Arduino™ to Control a Color-Changing Infinity Mirror

Science Fair Project Idea

Scientific Method

This project is a follow-up to the Science Buddies project Explore Optical Illusions: Build an Infinity Mirror, which shows you how to build a basic infinity mirror using light emitting diodes (LEDs) and arts and crafts materials. What if you wanted to build an infinity mirror that could change colors, like the one in Figure 1? Figure 1. A color-changing infinity mirror. You can do this by using special RGB (red, green, and blue) LEDs. Just like the pixels… Read more

Use Super-strong Magnets to Make a Simple Motor

Science Fair Project Idea

Scientific Method

In this science project, you will build what might be the world's simplest motor. It has just four basic parts: magnets, a battery, a screwdriver, and a short piece of wire. It takes only minutes to assemble, but it provides a wonderful device to explore how electricity and magnetism combine to produce a fast-spinning motor. Read more

Using the Solar & Heliospheric Observatory Satellite (SOHO) to Measure the Motion of a Coronal Mass Ejection

Science Fair Project Idea

Scientific Method

The sun sometimes releases huge bursts of electrified gases into space. These bursts are called coronal mass ejections (or CMEs). When CMEs are directed towards Earth they can generate auroras, the spectacular atmospheric displays also known as "northern lights" (photo by Chris VenHaus, 2001). In this project you'll use images from the SOHO satellite to measure how fast CMEs move. Read more

What Sensors Are Best for Self-Driving Cars?

Science Fair Project Idea

Scientific Method

Self-driving cars use a variety of sensors to evaluate and navigate their environment. Each type of sensor has advantages and disadvantages. In this project you will evaluate two common types of distance sensor (ultrasonic and infrared) and compare their performance in different scenarios. Read more

What's the Best Way to Disable a Drone?

Science Fair Project Idea

Engineering Design Process

Drones are small, fast, and maneuverable - this can make them very hard to knock down! Check out this Mark Rober video where he explores both how professional defense companies and some backyard YouTube engineers tackle the problem of knocking drones out of the sky. Can you take this engineering challenge on yourself? What methods can you devise to take down a drone? Which one works the best? Drones can be expensive, and you probably do not want to risk damaging a $1,000 drone for your science… Read more

Industry, Innovation and Infrastructure, Ninth Grade Science Projects (166 results)

Explore Our Science Videos