High School, Mechanical Engineering Projects, Lessons, Activities (Page 2)

Less Cowbell! The Unconstrained Truth About Constrained-Layer Damping

Science Fair Project Idea

Scientific Method

Noise is everywhere. From the clanking of a cowbell to the din of the lunchroom, we are surrounded by noise. Sometimes there's no way to get away from it, but there is a way to deal with it—constrained-layer damping. By simply creating a layered sandwich of somewhat flexible materials, what was once a noisy cowbell can become a "noise blanket." This science fair project shows you how to transform a noisy piece of metal into a sound-muffling constrained-layer damper. You'll record the… Read more

Ping Pong Pickup Challenge for Grades 9-12

Lesson Plan Grade: 9th-12th

1

2

3

4

5

8 reviews

In this fun engineering lesson plan, your students will build devices from paper, tape, string, and paper clips to pick up and retrieve a ping pong ball. The challenge is to pick up the ball from as far away as possible! Elementary school and middle school versions of this lesson plan are also available. The 2023 competition is over, but you can see what students built and learn about the winners on the 2023 Engineering Challenge summary page. Read more

NGSS Performance Expectations:

High School - Science & Engineering Practices

Build a Differential from K'Nex®

STEM Activity

1

2

3

4

5

10 reviews

What in the world is a differential and what does it do? A differential is a mechanism that helps cars go around turns without the wheels slipping. In this activity you will build your own working model differential from a building toy like K'Nex®! Read more

Build Your Own Helio Tracker—a Self-powered Mechanical Sunflower that Turns with the Sun

Science Fair Project Idea

Scientific Method

The amount of energy produced by most photovoltaic (solar) panels is limited, due to their immobility. However, when photovoltaic panels track the movement of the Sun, their efficiency increases significantly. This can be done with computers and sophisticated electronics, but for rural or wilderness settings, a "low-tech" sun tracker would be beneficial. A solution exists in nature: the sunflower. The challenge in this science fair project is to design and build a device that imitates the… Read more

Choosing the Best Gear Ratio for Maximum Bike Speed

Science Fair Project Idea

Scientific Method

Are you into cycling and speed? Then this is the science fair project for you! In this science fair project, you will determine the best gear ratio for your bike, to get the highest speed after a curve and onto a straightaway. You will learn a lot about applied mechanics and gears, all while having fun riding your bike. Read more

Feeding Fido & Fluffy: Designing an Automatic Pet Feeder

Science Fair Project Idea

Scientific Method

An overnight trip to the beach or a quick two-day vacation can be lots of fun. What do you do to prepare? Pack your clothes, get sunscreen lotion, and borrow a book from the library. But wait! Who is going to feed your dog or cat? It would be irresponsible to let them go hungry. And you can't just leave food out, because it can get stale and start to grow bacteria, which can cause your pet to get sick. Also, it is not a good idea to leave bowls of food out because a pet might overeat, which is… Read more

How Does Spark Plug Gap Affect Engine Performance?

Science Fair Project Idea

Scientific Method

Do you know what a spark plug is? Have you ever replaced an old, dirty, or worn out spark plug in an engine? These small parts are crucial to the operation of internal combustion engines. In this science project, you will find out how "gapping" a spark plug affects engine performance. Can you get more power or better fuel economy out of your engine by changing the spark plug gap? Try this project and find out! Read more

Making Model Microfluidic Devices Using JELL-O

Lesson Plan Grade: 9th-12th

Students create large-scale models of microfluidic devices using a process similar to that of the PDMS and plasma bonding that is used in the creation of lab-on-a-chip devices. They use disposable foam plates, plastic bendable straws and gelatin dessert mix. After the molds have hardened overnight, they use plastic syringes to inject their model devices with colored fluid to test various flow rates. From what they learn, students are able to answer the challenge question… Read more

NGSS Performance Expectations:

HS-ETS1-2. Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.

Measuring Vibrational Frequency with Light

Science Fair Project Idea

Scientific Method

Strike a key on the piano, and you hear the string vibrating. Just about any object vibrates when it's knocked, but how much and how fast? What properties of the material affect the way it vibrates? This project helps you find out. You'll build a simple light-sensing circuit for measuring the frequency of vibrating springs. Read more

Mix It Up: Transferring Heat by Convection in a Tank

Science Fair Project Idea

Scientific Method

Big, puffy, cotton-like clouds, and the bubbles in a pot of boiling water may not seem like they have much in common, but they do—both are formed by a heat-transfer process called convection. Warmed gases and liquids rise, while cooler ones fall, creating currents and mixing things up. Whether making processed foods in a factory or making plastic or metal parts, knowing how to mix up a big tank of hot and cold liquids or gases quickly is important. Engineers must rely on experimentation… Read more

High School, Mechanical Engineering Projects, Lessons, Activities (25 results)

Explore Our Science Videos