Industry, Innovation and Infrastructure Science Projects (Page 35)

Shapes with Straws

Science Fair Project Idea

Scientific Method

Start with 7 drinking straws and 14 paper clips. Use the paper clips to fasten the straws together. Here's how: 1) Clip two paper clips together, narrow end to narrow end. 2) Push the wide ends of each clip into the end of a straw. That's it! Connect four straws to make a square, and three straws to make a triangle. Now test which shape is stronger. Hold the shapes vertically, with an edge or a vertex resting on the tabletop. Have a helper push on the opposite side or vertex. Which shape… Read more

Using Synthetic DNA as a Secret Barcode

Science Fair Project Idea

Scientific Method

How would you secretly mark a bank robber during a robbery? What could you do to ensure that the ethically grown cotton you grew and shipped off for weaving and garment making was used to make the shipment of shirts you received weeks later? When we want to tag and track something, we often use a barcode. From grocery store foods to FedEx packages, barcodes are a way of tagging and identifying items. The fact that barcodes can be unique and are easy to read are key features. Not all things… Read more

Build an Arduino Robot

Science Fair Project Idea

Engineering Design Process

The Science Buddies Bluebot Kit contains parts to build four different robots: A motion-activated robot that uses a passive infrared (PIR) sensor A light-tracking robot that uses photoresistors A line-following robot that uses infrared emitter-detectors An obstacle-avoiding robot that uses bump sensors However, in each project, the sensors are hard-wired to control the robot's motors. This allows the robot to steer left and right based on input from two sensors, but it does not allow the… Read more

Testing a Parabolic Reflector with Light from an LED

Science Fair Project Idea

Scientific Method

You can see examples of parabolic reflectors in flashlights, car headlights, satellite TV antennas, and even on the sidelines at football games. How do these "dish" antennas work to gather signals? What is the best position for placing the detector for these antennas? In this project, you can use an LED and a simple photodetector to find out for yourself. Read more

Investigating Fluid Viscosity

Science Fair Project Idea

Scientific Method

You can measure the viscosity of a fluid using a glass tube and a marble with slightly smaller diameter than the tube. Seal one end of the tube. Fill the tube with the fluid to be tested. Drop the marble into to the tube and measure the time it takes to fall a fixed distance. Repeat the measurement several times, and use the average value. How does viscosity change with the amount of sugar dissolved in water? How does viscosity change with temperature? Read more

Design Clothing with Built-In Sensors

Science Fair Project Idea

Engineering Design Process

Have you ever worn a costume that lit up or played sound? Have you ever wished you had a suit of armor with built-in moving parts like a superhero? What if you could make your costume or suit react to your own movements or even other people who bump into you? The Science Buddies activity Weaving a Wearable Touch Sensor shows you how to make a capacitive sensor that responds to touch and can be woven directly into fabric (Figure 1). Can you design a piece of clothing that includes one… Read more

Can a Toilet Paper Tube Support Your Weight?

Science Fair Project Idea

Scientific Method

Here's a fun project idea to learn about compression forces. For this experiment you'll need some empty toilet paper tubes, masking tape, sand (or table salt), pebbles (or marbles), a funnel, a cardboard box, and a sturdy chair to help you balance while testing the column. Seal one end of the tube with masking tape. Use the funnel to fill the tube with sand (or salt). Seal the other end with tape. Place the tube on end inside the paper box. Place the chair with its back to the box and hold… Read more

Make Your Own Electric Guitar Pickup

Science Fair Project Idea

Scientific Method

If you like playing electric guitar, this could be a cool project for you. Have you ever wondered how an electric guitar works? In this project you'll wind one or more of your own electric guitar pickups and test them out in an inexpensive electric guitar. How will the sound change with the number of turns you use in the coil? Or with the strength of the magnets you use? Read more

Under Pressure: Sand Under Lateral Compression

Science Fair Project Idea

Scientific Method

Here's a project that involves a different kind of sandbox than the ones you usually think of. This one has a moving wall inside, acting like a piston, to compress the sand. You can make layers using two different colors of sand, and then see what happens when you compress the layers with the piston. If you're handy with woodworking tools, this is a good project to give you a feel for the effects of geological forces that deform the Earth's crust. Read more

Squishy Robot Simulator: Physics Settings

Science Fair Project Idea

Scientific Method

In our introductory VoxCAD project, we provided you with a template file that included default material properties and physics simulation settings. These settings include friction, gravity, and temperature — all of which can drastically change how fast your robots move. However, we did not explain what exactly all these physics simulation settings meant, or how to change them. You can access the physics settings through the Physics Settings tab after entering the Physics Sandbox mode, as… Read more

Industry, Innovation and Infrastructure Science Projects (404 results)

Explore Our Science Videos