Tenth Grade, Electricity & Electronics Projects, Lessons, Activities (Page 5)

How Do You Know Where You Are Without GPS? Dead Reckoning and Inertial Navigation

Science Fair Project Idea

Engineering Design Process

Put a meter stick on the ground. Starting at one end of the stick, close your eyes and try to walk exactly one meter. Open your eyes. How close were you? Now try it again with five, ten, or twenty meters. Does it get harder as the distance gets bigger? Without an outside reference from your visual system, it's quite difficult to know exactly how far you've gone! Electronic navigation systems face the same problem. Without an external reference like the global positioning system (GPS), it's very… Read more

How Long Does It Take to Fry a Diode?

Science Fair Project Idea

Scientific Method

If you have ever built an electronic circuit with a soldering iron, you know that the component leads get hot. How much of that heat gets into the device you're soldering? This project shows you how you can use a silicon diode as a temperature sensor to find out. Read more

Linear vs. Logarithmic Changes: What Works Best for Human Senses?

Science Fair Project Idea

Scientific Method

If you want to get your friend's attention at a crowded sporting event with lots of people cheering, you need to shout. If you're trying to do the same thing in a quiet library, a whisper works. The detection limit for each of our senses depends on the amount of "background" stimulation that is already present. This project uses an LED control circuit to investigate detection of changes in light levels. Read more

Nanotechnology in Action: Organic Electronics

Lesson Plan Grade: 9th-12th

This activity focuses on the use of graphene in organic fibers, and their applications in organic electronics, e-textiles and wearable technologies. Students learn about the properties of graphene—unique form of carbon—and how graphene-based fibers are fabricated, how to measure resistance, how to calculate resistivity, and how a material changes its electrical properties. Students also learn about the importance of defining design parameters, which is an… Read more

Protecting Nature with Technology

Lesson Plan Grade: 9th-12th

1

2

3

4

5

2 reviews

You might have read about the negative impacts modern human civilization has had on the environment, like pollution, deforestation, and extinction of animal species. How can we use modern technology to help protect the environment? In this project-based lesson students will design an electronic circuit that can measure something in the environment like water quality and light pollution, and develop a plan for how their circuits could be used to solve a real-world problem. Read more

NGSS Performance Expectations:

HS-ESS3-4. Evaluate or refine a technological solution that reduces impacts of human activities on natural systems.

Recording on a Wire

Science Fair Project Idea

Scientific Method

Today magnetic recording is used in audio and video cassette recorders, and computer disk drives. Did you know that you can also use an electromagnet to record and play back from a steel wire? In fact, this is how magnetic recording got started. This project shows you how to build a simple wire recorder. Read more

Two-Point and Four-Point Methods for Measuring Small Resistances

Science Fair Project Idea

Scientific Method

Measuring the value of a resistor with a multimeter is pretty simple. You set the multimeter to measure resistance, connect the two leads to the resistor (possibly using some handy alligator clips), and read the resistance value. This is called a two-point measurement (one probe on each of the two resistor leads). But what if the resistance you want to measure is very small, in the milli or micro-ohm (mΩ or μΩ) range? This can introduce problems because many low-cost multimeters… Read more

Wearable RGB LED Unicorn Horn

STEM Activity

1

2

3

4

5

1 review

Sewable circuits are a fun way to mix electronics and arts and crafts by sewing circuits into clothing or fabric. This sewable circuit focuses on creating a unicorn horn with a programmable red-green-blue (RGB) LED in the tip that changes colors. You will use conductive thread to make the circuit, but your stitched lines will also form the spiral lines of the unicorn horn. Read more

Wire Wilt: How Light-Emitting Diodes Fade As Temperature Increases

Science Fair Project Idea

Scientific Method

What's your favorite thing to do on the hottest day of the year? Dip your toes in an icy river? Hang out by the pool? Retreat to a cool basement? Lie motionless in the shade? You're probably not too eager to move around and put out a lot of energy, like mowing the lawn in the mid-afternoon sun. Well, you're not the only one. In this electronics science fair project, you'll find out that some semiconductor devices, like light-emitting diodes (or LEDs), act the same way. As their internal… Read more

Tenth Grade, Electricity & Electronics Projects, Lessons, Activities (49 results)

Explore Our Science Videos