High School, Electricity & Electronics Science Projects (64 results)
|
Select a resource
Coding Projects
Sort by
|
LEDs (light-emitting diodes) are electronic components that convert a portion of the electrical energy flowing through them into light. How does the intensity of the light produced vary with the current flowing through the LED? To find out, you'll build some simple circuits to vary the current flowing an LED. You'll also build a simple light-to-voltage converter circuit to measure LED output.
Read more
Do you have trouble remembering when to stop playing and clean up? Have you ever had little kids throw a tantrum about cleaning up while you were babysitting? If so, this project is for you! You will convert a stuffed animal into a light-up activity timer. You can use the timer for different activities like play, exercise, or doing homework. What you use it for is up to you!
Read more
Piezoelectric barbecue fire starters work by creating a spark that ignites the volatile lighter fluid, which then starts the charcoal burning. They are low current, high voltage devices. How high does the voltage have to get to make a spark in air? This project shows you a way to find out by with an inexpensive experimental setup to measure the distance that the spark can travel between two spherical electrodes.
Read more
Motors are used in many things you find around your house, like your refrigerator, coffee maker, and even a lawn mower. In this electronics science fair project, you will get to build a simple motor, using a kit, and then test how the number of batteries (amount of voltage) used to power the motor affects its performance.
Read more
Have you ever worn a costume that lit up or played sound? Have you ever wished you had a suit of armor with built-in moving parts like a superhero? What if you could make your costume or suit react to your own movements or even other people who bump into you? The Science Buddies activity
Weaving a Wearable Touch Sensor
shows you how to make a capacitive sensor that responds to touch and can be woven directly into fabric (Figure 1). Can you design a piece of clothing that includes one…
Read more
An electric current produces a magnetic field. You can take advantage of this fact to make a simple apparatus to test the electrical conductivity of various materials, including both solids and liquids. The detector consists of a coil of wire, with a magnetic compass inside it. You connect one end of the coil to a D-cell battery. The other end of the coil is connected to whatever material you are testing, and the material, in turn, is connected to the other end of the D-cell. In other…
Read more
If you want to get your friend's attention at a crowded sporting event with lots of people cheering, you need to shout. If you're trying to do the same thing in a quiet library, a whisper works. The detection limit for each of our senses depends on the amount of "background" stimulation that is already present. This project uses an LED control circuit to investigate detection of changes in light levels.
Read more
Put a meter stick on the ground. Starting at one end of the stick, close your eyes and try to walk exactly one meter. Open your eyes. How close were you? Now try it again with five, ten, or twenty meters. Does it get harder as the distance gets bigger? Without an outside reference from your visual system, it's quite difficult to know exactly how far you've gone!
Electronic navigation systems face the same problem. Without an external reference like the global positioning system (GPS), it's very…
Read more
You can see examples of parabolic reflectors in flashlights, car headlights, satellite TV antennas, and even on the sidelines at football games. How do these "dish" antennas work to gather signals? What is the best position for placing the detector for these antennas? In this project, you can use an LED and a simple photodetector to find out for yourself.
Read more
Here's a puzzle you may have heard before which you can build as a simple electric circuit. First, the puzzle: a farmer is traveling to market with his cat, a chicken and some corn. He has to cross a river, and the only way to cross is in a small boat which can hold the farmer and just one of the three items he has with him. The problem is, he has to be very careful about what he chooses to leave behind at any time. If the cat and chicken are left alone, the cat will eat the chicken. If…
Read more
|














