Industry, Innovation and Infrastructure Science Projects (404 results)
|
Select a resource
Filter by
Coding Projects
Sort by
|
In astronomy, a transit (or astronomical transit) is a phenomenon when a celestial body passes directly between a larger body and the observer. As viewed from a particular vantage point, the transiting body appears to move across the face of the larger body, covering a small portion of it.
The word "transit" refers to cases where the nearer object appears smaller than the more distant object. Cases where the nearer object appears larger and completely hides the more distant object are known as…
Read more
If you have ever built an electronic circuit with a soldering iron, you know that the component leads get hot. How much of that heat gets into the device you're soldering? This project shows you how you can use a silicon diode as a temperature sensor to find out.
Read more
Check out the soft robotic gripper and artificial robotic skin projects. These projects show you how to use flexible silicone rubber to make robots or robotic parts. The second project shows you how to connect external LEDs using an Arduino. The LEDs light up when an embedded piece of conductive fabric stretches. What about embedding LEDs in the silicone rubber? You can do this by embedding the LEDs between layers of silicone (Figure 1). The trick is to solder flexible stranded wires to the…
Read more
You have secret treasure that you need to keep safe from thieves. How do you keep guard 24 hours a day without skipping school and the rest of your important activities? You build a guard robot and have it do the hard work! You can build a guard robot using a LEGO® MINDSTORMS® set and the instructions in this project to guide your efforts. And do not worry: your secret is safe with your robot.
Read more
Passports, identification cards, bus passes, and even some credit cards contain RFID tags. An RFID (radio-frequency identification) tag allows a card to be read by a computer from a short distance away. While this is very useful in everyday life, would you believe you can make music with it? RFID + sampled music sounds + a little crafting = a fun musical instrument that is limited only by your imagination. In this science project, you will make handbells out of paper cups that play real sounds,…
Read more
Measuring the value of a resistor with a multimeter is pretty simple. You set the multimeter to measure resistance, connect the two leads to the resistor (possibly using some handy alligator clips), and read the resistance value. This is called a two-point measurement (one probe on each of the two resistor leads). But what if the resistance you want to measure is very small, in the milli or micro-ohm (mΩ or μΩ) range? This can introduce problems because many low-cost multimeters…
Read more
When something goes wrong, do you like to try to figure out why? Engineers do this all the time. They even have a fancy name for it: failure analysis. Understanding how different materials break is an important part of failure analysis. Here's a project with one approach to studying the way things break.
Read more
How much force can a rubber band withstand before breaking? Do rubber bands that stretch longer take more or less force to break? How does the elasticity of a rubber band change with temperature? Use a spring scale to measure the applied force, and a meter stick or ruler to measure the change in length. Recording with a video camera (or possibly two) can help you to capture the values at the moment before the rubber band breaks. You can change the temperature of the rubber bands using…
Read more
For a colony of humans to survive and thrive on Mars, they will need to make the most of what is available on Mars. We know from prior space missions what the Martian ground cover looks like. In this project, you will see if this ground cover can be transformed into strong construction material.
The first requirement for construction material is that it is strong so it does not collapse under its own weight. Because the mass of Mars is about 10 times less than the mass of Earth, its…
Read more
This is a good project for someone who is interested in both electronics and color vision. The equipment needed is on the expensive side, but if you continue studying electronics, you can use it again and again.
Read more
|















