Industry, Innovation and Infrastructure, Tenth Grade, Robotics Science Projects (Page 2)

What Sensors Are Best for Self-Driving Cars?

Science Fair Project Idea

Scientific Method

Self-driving cars use a variety of sensors to evaluate and navigate their environment. Each type of sensor has advantages and disadvantages. In this project you will evaluate two common types of distance sensor (ultrasonic and infrared) and compare their performance in different scenarios. Read more

Build an Obstacle-Avoiding Robot (BlueBot Project #4)

Science Fair Project Idea

Scientific Method

In the animal kingdom, many different critters use whiskers to help them find their way around in the dark, through murky waters, or even to help them hunt prey. Whiskers can be very useful when the animals cannot rely on sight. Did you know that you can also build a robot that uses "whiskers" to find its way around? This project will show you how to build a simple robot that uses whiskers as "bump sensors" to help the robot detect when it is about to bump into an obstacle, so it can turn… Read more

Build an Autonomous Arduino Robot with Bump Sensors

Science Fair Project Idea

Scientific Method

Mechanical switches are common in many machines and robots. They can be used to detect when a button is pushed, when a door is open, or a low-speed collision when two objects bump into each other. Switches can act as "bump sensors" on a simple robot to help it detect when it hits an obstacle. The robot can use this information to navigate around obstacles and avoid getting stuck. Can you build and program a robot that can drive around your house while using bump sensors to avoid obstacles? Read more

PID Controller Tuning for a Drone

Science Fair Project Idea

Engineering Design Process

Note: to do this project you will need the DIY Mini Drone Kit, available from our partner Home Science Tools®. An Arduino must be purchased separately. The Electronics Kit for Arduino, available from our partner Home Science Tools®, contains the additional parts you will need, including an ultrasonic sensor. The program in the DIY Mini Drone: Arduino™ Altitude Control project uses a proportional controller to control the drone's altitude. A potentiometer is connected to one… Read more

Build an Arduino Robot

Science Fair Project Idea

Engineering Design Process

The Science Buddies Bluebot Kit contains parts to build four different robots: A motion-activated robot that uses a passive infrared (PIR) sensor A light-tracking robot that uses photoresistors A line-following robot that uses infrared emitter-detectors An obstacle-avoiding robot that uses bump sensors However, in each project, the sensors are hard-wired to control the robot's motors. This allows the robot to steer left and right based on input from two sensors, but it does not allow the… Read more

Control Motors with Your Muscles!

Science Fair Project Idea

Engineering Design Process

Have you ever wished you could control your own suit of power armor like Iron Man? What about building a set of Wolverine-like retractable claws? You can get started by using electromyography (EMG) sensors, which can measure the tiny electrical signals generated by our muscles when they contract (Figure 1). You can interface these sensors with a microcontroller like an Arduino and use the output to control LEDs or motors. Getting these sensors to work can be tricky. The electrical signals… Read more

Keep Your Arduino Robot From Falling Off a Cliff

Science Fair Project Idea

Engineering Design Process

Humans cannot see infrared light, but robots can! At least, they can when they use special infrared light sensors. These sensors can help robots detect nearby objects to avoid collisions and even help them avoid driving off edges. In this project you will build your own Arduino robot that uses infrared sensors to avoid driving off the edge of a table. Read more

Motorizing a Robotic Hand

Science Fair Project Idea

Scientific Method

Imagine how cool it would be to have your own motorized robot hand. Well, stop imagining and turn that daydream into reality! Start out by designing and building a robot hand. The Science Buddies project Grasping With Straws: Make a Robot Hand Using Drinking Straws shows you a simple way to make a robot hand with drinking straws, or you can design a robot hand from any other materials you think are suitable. Your hand design will need sewing threads, or some other mechanism, for motors to… Read more

Build Your Own RC Drone

Science Fair Project Idea

Engineering Design Process

Important Safety Information About Drones Drones are a lot of fun to fly, but they can be dangerous if not used responsibly. Local, state, and federal regulations about recreational use of drones may vary based on your location or change over time. For example, you may be required to register your drone, or be prohibited from flying it in certain locations (like near an airport or over a crowd of people). Before you do a science project with a drone, ask an adult to help you find out… Read more

Soft Robots with Built-In LEDs

Science Fair Project Idea

Engineering Design Process

Check out the soft robotic gripper and artificial robotic skin projects. These projects show you how to use flexible silicone rubber to make robots or robotic parts. The second project shows you how to connect external LEDs using an Arduino. The LEDs light up when an embedded piece of conductive fabric stretches. What about embedding LEDs in the silicone rubber? You can do this by embedding the LEDs between layers of silicone (Figure 1). The trick is to solder flexible stranded wires to the… Read more

Industry, Innovation and Infrastructure, Tenth Grade, Robotics Science Projects (20 results)

Explore Our Science Videos