High School, Physics Science Projects (53 results)
|
Select a resource
Coding Projects
Sort by
|
Are you fascinated by radioactivity and the emission of particles caused by the disintegration of an atom? This science project enables you to observe safely a spectacular display of radioactive decay. Following the instructions in the Procedure, you will be able to isolate a safe radioactive source and build a cloud chamber to watch the radioactive decay. Then you will use your cloud chamber to discover if a plastic lid can shield you from this type of radioactive decay particles.
Read more
The radiation sources recommended in this experiment are low-dose radioactive sources and do not require a license to purchase; they are safe to work with as long as these common-sense safety tips are followed:
Wear disposable gloves when handling any radioactive source.
Never rub your eyes or mouth while you are handling the radioactive source.
NEVER swallow any radioactive source and use protective glasses when bringing a source within a few inches of…
Read more
Safety Notes about Neodymium Magnets:
Neodymium magnets are very strong. Adult supervision is recommended when using them. Be careful not to drop the magnets, and do not let them slam together or fall. They may pinch your fingers, crack, or shatter. Keep magnets away from small children, pets, credit cards, and pacemakers.
In the Science Buddies project Human-Powered Energy,
you can learn about the basics of magnetic induction, or how moving magnets can be used to generate an…
Read more
For example, think of hitting a baseball, heading a soccer ball into the net, or hitting a tennis ball with a racquet. Where the ball goes depends on...what? You can set up a simple model to start your investigation. You'll need a marble, a flat piece of wood, a flat piece of cardboard, a pencil, a ruler, a protractor, and a level surface. Lay down the cardboard down on a level surface and set up the flat piece of wood at one edge. The wood will act like a wall, and you're going to roll…
Read more
Balloons are a festive addition to many celebrations. You've probably noticed, though, that over a short period of time, helium-filled latex balloons start to lose their buoyancy. So when you're planning your next party, how soon can you buy the balloons in advance before they start deflating? In this science fair project, you will use a simple scale to measure the lift supplied by a set of balloons, and determine the rate of lift decay.
Read more
This project is an experiment in classical physics. You'll be following in Galileo's footsteps, and investigating Newton's laws of motion, but you'll be taking advantage of modern video recording technology to make your measurements. Sure, it's been done before, but if you do it yourself, you can get a firm understanding of these important concepts.
Read more
Did you know that when you dip your finger in water and pull it out, the water is actually pulling back on you? Here's a way you can measure how much.
Read more
There is evidence to be gathered at every crime scene. The hard part is making sense of it all. That's where crime scene investigators and forensic scientists come in. In this science fair project, you will investigate blood spatter using fake blood. Your job, as an impartial scientist, is to deliver facts so that justice can be served. Are you up to the challenge?
Read more
Radiometers are fun-to-watch novelty items, but they also have a distinguished scientific history, having been studied by James Clerk Maxwell and Albert Einstein. A radiometer has a set of four vanes (like small sails) connected to a spindle that is free to rotate. When the radiometer is placed in bright light, the vanes and spindle start to spin. It looks like a magic trick, but there is a scientific explanation for this weird behavior. In this science fair project, you will experiment with…
Read more
The first man-made satellite, the Sputnik 1, was launched in 1957. As of late 2020, more than 2,600 man-made satellites orbit Earth, with a little over 70% of them in low Earth orbit. If you would like to delve into how satellites and their sensors are configured, or into how their orbits are planned—and do not shy away from a little programming—this project is for you! With the help of FreeFlyer®—powerful software that allows you to simulate satellite orbit and…
Read more
|














